S
Stu jaxon
Guest
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
A
Adrian Caspersz
Guest
On 01/04/2021 19:04, Stu jaxon wrote:
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
A
Adrian Caspersz
Guest
On 01/04/2021 19:04, Stu jaxon wrote:
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
S
Stu jaxon
Guest
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
S
Stu jaxon
Guest
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
board part # R804A...On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
O
ohg...@gmail.com
Guest
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
O
ohg...@gmail.com
Guest
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
O
ohg...@gmail.com
Guest
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
S
Stu jaxon
Guest
On Tuesday, April 6, 2021 at 11:26:35 AM UTC-4, ohg...@gmail.com wrote:
I did lift a lead, and it\'s still reading zero, like a short.??? it doesn\'t look like it\'s paralleled with another low resistance component.
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
I did lift a lead, and it\'s still reading zero, like a short.??? it doesn\'t look like it\'s paralleled with another low resistance component.
S
Stu jaxon
Guest
On Tuesday, April 6, 2021 at 11:26:35 AM UTC-4, ohg...@gmail.com wrote:
I did lift a lead, and it\'s still reading zero, like a short.??? it doesn\'t look like it\'s paralleled with another low resistance component.
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
I did lift a lead, and it\'s still reading zero, like a short.??? it doesn\'t look like it\'s paralleled with another low resistance component.
P
Peter W.
Guest
> I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Lemme see. 0.068 ohms. Really? That would be within the margin-of-error for many cheap VOMs. Does your meter have a range-adjust? If you are in the 0-10.000 range, you will not get a wiggle at 0.068 ohms. Of you are in the 0-1 ohm range, that is entirely something else.
Peter Wieck
Melrose Park, PA
Lemme see. 0.068 ohms. Really? That would be within the margin-of-error for many cheap VOMs. Does your meter have a range-adjust? If you are in the 0-10.000 range, you will not get a wiggle at 0.068 ohms. Of you are in the 0-1 ohm range, that is entirely something else.
Peter Wieck
Melrose Park, PA
R
Ralph Mowery
Guest
In article <72fa8efb-5541-4ec0-b74f-ec0f1edec73an@googlegroups.com>,
peterwieck33@gmail.com says...
It would take a very special meter to show a .068 resistor value. That
or measure the voltage across it with a known ammount of current through
it.
For most meters there could be that much contact resistance.
peterwieck33@gmail.com says...
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Lemme see. 0.068 ohms. Really? That would be within the margin-of-error for many cheap VOMs. Does your meter have a range-adjust? If you are in the 0-10.000 range, you will not get a wiggle at 0.068 ohms. Of you are in the 0-1 ohm range, that is entirely something else.
It would take a very special meter to show a .068 resistor value. That
or measure the voltage across it with a known ammount of current through
it.
For most meters there could be that much contact resistance.
C
Cydrome Leader
Guest
Stu jaxon <stankowalski02@gmail.com> wrote:
0.068 ohms is basically a short. It\'s unlikely a resistor will fail
shorted, so leave it alone, it\'s probably OK.
On Tuesday, April 6, 2021 at 11:26:35 AM UTC-4, ohg...@gmail.com wrote:
On Tuesday, April 6, 2021 at 8:35:31 AM UTC-4, Stu jaxon wrote:
On Thursday, April 1, 2021 at 2:33:50 PM UTC-4, Adrian Caspersz wrote:
On 01/04/2021 19:04, Stu jaxon wrote:
Hi Group, need help identifying a blown IC. it\'s on Vizio e550-b2, power supply board # DPS-167DP ,.. Board locator # ic901, it has 7 pins, and the top is blown away.??
You missed an \'I\'
Googling is remarkably effective with the right input.
e550I-b2 ic901
e.g.
https://www.badcaps.net/forum/showthread.php?t=79046
https://www.badcaps.net/forum/showthread.php?t=70423
Apparently a LD7913JGM6, a PWM controller?
--
Adrian C
I have a .068 ohm resistor reading 0.00.. acting like a short, it is a low ohm resistor, is it supposed to read???
Did you zero the meter? Sometimes a low value resistor is shunted by a choke, and sometimes some residual voltage in the circuit will throw off a resistance reading. Try removing one lead of the resistor and checking again, and if it\'s OK, see if it is paralleled with another low resistance component.
I did lift a lead, and it\'s still reading zero, like a short.??? it doesn\'t look like it\'s paralleled with another low resistance component.
0.068 ohms is basically a short. It\'s unlikely a resistor will fail
shorted, so leave it alone, it\'s probably OK.
J
jurb...@gmail.com
Guest
A 0.068 reading zero is not uncommon. Most ohmmeters do not measure that low. Suffice it to say it is not open, and it is very unlikely to short.
Before changing tht IC, you must find and fix any shorts on the secondary side of the transformer and identify the output pin. It will go straight to the transformers and may have either a cutout around it in the board or a coating of white shit on the board.
Whichever it is, if nothing go with the ohmmeter from the top (+ probably) and find a pin that checks pretty much continuity to that gong to the transformer. Now look around, there will be a diode, resistor and a cap Make sure those components are not open and as they are voltage snubbers without them the IC is destroyed fast.
Before changing tht IC, you must find and fix any shorts on the secondary side of the transformer and identify the output pin. It will go straight to the transformers and may have either a cutout around it in the board or a coating of white shit on the board.
Whichever it is, if nothing go with the ohmmeter from the top (+ probably) and find a pin that checks pretty much continuity to that gong to the transformer. Now look around, there will be a diode, resistor and a cap Make sure those components are not open and as they are voltage snubbers without them the IC is destroyed fast.