BF957C Application

[Emile]

Can someone suggest a project/application that would call for an
XC2V6000-4BF957C? Thanks.

-Emile

 

[Ray Andraka]

I've used 2V6000's in several DSP applications including sonar and
radar beamformers.

Emile wrote:

Can someone suggest a project/application that would call for an
XC2V6000-4BF957C? Thanks.

-Emile

--
--Ray Andraka, P.E.
President, the Andraka Consulting Group, Inc.
401/884-7930 Fax 401/884-7950
email ray@andraka.com
http://www.andraka.com

"They that give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety."
-Benjamin Franklin, 1759

 

[Symon]

Use the DXN and DXP balls of the device along with a MAX6687 from
Maxim semi to make a thermometer. The FPGA will use remarkably little
power in this mode, as long as you don't connect any of the other 955
pins.

HTH, Symsx.

(p.s. Or you can also use the same pins in the feedback path of an
op-amp to use the FPGA in its secret, unpublished 'logarithmic' mode.)

banktrade2002@yahoo.com (Emile) wrote in message news:<952209fb.0310070512.731ec498@posting.google.com>...

Can someone suggest a project/application that would call for an
XC2V6000-4BF957C? Thanks.

-Emile

 

[Simon Peacock]

You could always get it to flash a LED every few seconds

Simon


"Emile" <banktrade2002@yahoo.com> wrote in message
news:952209fb.0310070512.731ec498@posting.google.com...

Can someone suggest a project/application that would call for an
XC2V6000-4BF957C? Thanks.

-Emile

 

[Magnus Homann]

banktrade2002@yahoo.com (Emile) writes:

Can someone suggest a project/application that would call for an
XC2V6000-4BF957C? Thanks.

Sorry, need speedgrade -6.

Homann
--
Magnus Homann, M.Sc. CS & E
d0asta@dtek.chalmers.se