C
Charlie+
Guest
Just wondered if anyone here has any info or experience with an old
Belkin UPS: Model No BU308000 (ukDB). its 800va /480W. The one I have
here works fine except the float charge for the 12v 9Ah battery is much
too high @ 380mA (new battery) and the battery just dries out, this
voltage needs setting lower but there is no internal preset pot
adjustment. Just wondered if the PC software (which I dont have) had
any facility to set this voltage (seems unlikely!) or if anyone has
played with one of these. Belkin and net no help - the unit is too old
(15 years-ish) and searches find no information or any schematic which
would have been really useful.
Thanks C+
Belkin UPS: Model No BU308000 (ukDB). its 800va /480W. The one I have
here works fine except the float charge for the 12v 9Ah battery is much
too high @ 380mA (new battery) and the battery just dries out, this
voltage needs setting lower but there is no internal preset pot
adjustment. Just wondered if the PC software (which I dont have) had
any facility to set this voltage (seems unlikely!) or if anyone has
played with one of these. Belkin and net no help - the unit is too old
(15 years-ish) and searches find no information or any schematic which
would have been really useful.
Thanks C+