Battery level indicator - Tri-colour?

J

Jason S

Guest
Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's) to
monitor the output voltage of a circuit, to tell me if the voltage is normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much luck
using search engines.



Thanks in advance.
 
Jason S wrote:
Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's) to
monitor the output voltage of a circuit, to tell me if the voltage is normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much luck
using search engines.



Thanks in advance.


You mean like this one from Jaycar
Click to expand...

<http://www1.jaycar.com.au/productView.asp?ID=KA1683&CATID=&keywords=&SPECIAL=&form=KEYWORD&ProdCodeOnly=yes&Keyword1=K&Keyword2=K&pageNumber=&priceMin=&priceMax=&SUBCATID=>

Kevin Martin
 
"Jason S" <jst3712@iprimus.com.au> wrote in message
news:42a93fef$1_1@news.iprimus.com.au...
Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's)
to
monitor the output voltage of a circuit, to tell me if the voltage is
normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was
wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much
luck
using search engines.



Thanks in advance.
Click to expand...
For three colours you only need two leds, consider what happens when both
are on.

Search for "window detectors".

How about something like this. I will set something up for a car battery.
To make up some numbers say one detector(A) turns on below 12 V. The
other(B) turns off below 10V.
Now with a bicoloured led hook A to the red led, B to the Green.

Batt V DetectA Detect B Colours
9 ON OFF RED
11 ON ON RED + GREEN= AMBER?
13 OFF ON GREEN

I know that the problem with this system is that Green now becomes the
colour for overvolt, but it gives you a start.

HTH

Mike
 
"Kevin Martin" <kevinrailway@notreqdoptusnet.com.au> wrote in message
news:42a943be$0$13943$afc38c87@news.optusnet.com.au...
Jason S wrote:
Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's)
to
monitor the output voltage of a circuit, to tell me if the voltage is
normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was
wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much
luck
using search engines.



Thanks in advance.


You mean like this one from Jaycar

http://www1.jaycar.com.au/productView.asp?ID=KA1683&CATID=&keywords=&SPECIAL=&form=KEYWORD&ProdCodeOnly=yes&Keyword1=K&Keyword2=K&pageNumber=&priceMin=&priceMax=&SUBCATID=

Kevin Martin
Click to expand...
hmmm, no, I'd rather not have 10 LED's. A tri-colour would be nice, or just
a green, yellow and red LED. I'm sure it's possible. But thanks anyway. =)
 
"Mikegw" <mikegw20@spam.com.spam.hotmail> wrote in message
news:42a94445$0$27631$61c65585@un-2park-reader-02.sydney.pipenetworks.com.au...
"Jason S" <jst3712@iprimus.com.au> wrote in message
news:42a93fef$1_1@news.iprimus.com.au...
Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's)
to
monitor the output voltage of a circuit, to tell me if the voltage is
normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was
wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much
luck
using search engines.



Thanks in advance.

For three colours you only need two leds, consider what happens when both
are on.

Search for "window detectors".

How about something like this. I will set something up for a car battery.
To make up some numbers say one detector(A) turns on below 12 V. The
other(B) turns off below 10V.
Now with a bicoloured led hook A to the red led, B to the Green.

Batt V DetectA Detect B Colours
9 ON OFF RED
11 ON ON RED + GREEN= AMBER?
13 OFF ON GREEN

I know that the problem with this system is that Green now becomes the
colour for overvolt, but it gives you a start.

HTH

Mike
Click to expand...
Umm ok, that sounds like a start I suppose. I'll check it out later on.
Thanks =)
 
On Fri, 10 Jun 2005 17:23:25 +1000, "Jason S" <jst3712@iprimus.com.au> wrote:

Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's) to
monitor the output voltage of a circuit, to tell me if the voltage is normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much luck
using search engines.



Thanks in advance.
Click to expand...
Jaycar have an RGB led for $5.95 (ZD-0270).
You could also use a bi-colour led. Use the green and red for the normal and
high functions, then oscillate the signal to the led to create amber for the low
indicator.
 
"dmm" <dmmilne_REMOVE_@ozemail.com.au> wrote in message
news:pkkia195k2svmbh1emhkh0ams6nfsf9tim@4ax.com...
On Fri, 10 Jun 2005 17:23:25 +1000, "Jason S" <jst3712@iprimus.com.au
wrote:

Hi,

I want to use a tri-colour LED (or maybe just 3 different coloured LED's)
to
monitor the output voltage of a circuit, to tell me if the voltage is
normal
(green), too low (amber), or too high (red).
I have seen the "Bi-colour LED battery voltage indicator", but was
wondering
if there is such thing as a 3-stage indicator rather than just a 2-stage.



I would like some links or schematics to assist me. I haven't had much
luck
using search engines.



Thanks in advance.


Jaycar have an RGB led for $5.95 (ZD-0270).
You could also use a bi-colour led. Use the green and red for the normal
and
high functions, then oscillate the signal to the led to create amber for
the low
indicator.
Click to expand...
Thanks. I'll take that into consideration, as I've read that a 3-pin package
is not as common as the 2-pin. Easier to install on a PCB also. Now all i
need is a good battery level circuit that will control it for me! I'm
looking for a schematic as I want to be able to twink with the
components/operation. Like I want to be able to control the low, normal and
high voltages with precision, if possible. e.g. 13.6V.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top