basic question, virtex 2 pro

V

Vinod

Guest
Hi,
I am using EDK 3.2 with ISE 5.1.3 on a WinXp machine, and targeting
the Virtex 2 pro board. Does Modelsim XE allow me to simulate code
running on the PowerPC along with other external blocks written in
VHDL as one whole unit?
I do not have a board yet, and was also wondering whether such
simulations would be prohibitively long.

Links to informative websites would be appreciated

Thanks
Vinod
 
IIRC, ModelSIM XE doesn't support the SWIFT models needed to simulate the
PowerPCs. Perhaps IBM will give you the VHDL? Perhaps not! ;-)
Cheers, Syms.
"Vinod" <vananth@gmail.com> wrote in message
news:6cd79f5.0404290531.ffccd75@posting.google.com...
Hi,
I am using EDK 3.2 with ISE 5.1.3 on a WinXp machine, and targeting
the Virtex 2 pro board. Does Modelsim XE allow me to simulate code
running on the PowerPC along with other external blocks written in
VHDL as one whole unit?
I do not have a board yet, and was also wondering whether such
simulations would be prohibitively long.

Links to informative websites would be appreciated

Thanks
Vinod
Click to expand...
 
HI
Modelsim XE will not support there is a limitatino on the number of
lines of VHDL code.
you need Modelsim SE /PE
Ram

vananth@gmail.com (Vinod) wrote in message news:<6cd79f5.0404290531.ffccd75@posting.google.com>...
Hi,
I am using EDK 3.2 with ISE 5.1.3 on a WinXp machine, and targeting
the Virtex 2 pro board. Does Modelsim XE allow me to simulate code
running on the PowerPC along with other external blocks written in
VHDL as one whole unit?
I do not have a board yet, and was also wondering whether such
simulations would be prohibitively long.

Links to informative websites would be appreciated

Thanks
Vinod
Click to expand...
 
Thanks !

~vinod

On 29 Apr 2004 17:00:54 -0700, ramntn@yahoo.com (ram) wrote:

HI
Modelsim XE will not support there is a limitatino on the number of
lines of VHDL code.
you need Modelsim SE /PE
Ram

vananth@gmail.com (Vinod) wrote in message news:<6cd79f5.0404290531.ffccd75@posting.google.com>...
Hi,
I am using EDK 3.2 with ISE 5.1.3 on a WinXp machine, and targeting
the Virtex 2 pro board. Does Modelsim XE allow me to simulate code
running on the PowerPC along with other external blocks written in
VHDL as one whole unit?
I do not have a board yet, and was also wondering whether such
simulations would be prohibitively long.

Links to informative websites would be appreciated

Thanks
Vinod
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top