F
F Murtz
Guest
Anyone tell me how to remove flange on bamix to allow dismantling?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
K
K Ludger
Guest
"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e5656$1@dnews.tpgi.com.au...
of the housing by a circular plastic bush behind where the cutter/impeller
mounts. Its a push-click fit. A rounded shoulder clicks in the retain the
bush. There was some RTV or similar to seal it. The metal shaft will slide
right out when the bush is removed. Has your bottom bearing bush gone tight?
news:491e5656$1@dnews.tpgi.com.au...
If its like mine an old SB30-AA model the shaft is retained into the bottomAnyone tell me how to remove flange on bamix to allow dismantling?
of the housing by a circular plastic bush behind where the cutter/impeller
mounts. Its a push-click fit. A rounded shoulder clicks in the retain the
bush. There was some RTV or similar to seal it. The metal shaft will slide
right out when the bush is removed. Has your bottom bearing bush gone tight?
F
F Murtz
Guest
K Ludger wrote:
it looks like the flange has to be removed from outer shaft cover tube
but I dont know if it is threaded or shrink fit
behind the impeller there appears to be a metal sintered bearing"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e5656$1@dnews.tpgi.com.au...
Anyone tell me how to remove flange on bamix to allow dismantling?
If its like mine an old SB30-AA model the shaft is retained into the bottom
of the housing by a circular plastic bush behind where the cutter/impeller
mounts. Its a push-click fit. A rounded shoulder clicks in the retain the
bush. There was some RTV or similar to seal it. The metal shaft will slide
right out when the bush is removed. Has your bottom bearing bush gone tight?
The shaft is tight .
it looks like the flange has to be removed from outer shaft cover tube
but I dont know if it is threaded or shrink fit
F
F Murtz
Guest
Fred wrote:
"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e698c$1@dnews.tpgi.com.au...
K Ludger wrote:
"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e5656$1@dnews.tpgi.com.au...
Anyone tell me how to remove flange on bamix to allow dismantling?
If its like mine an old SB30-AA model the shaft is retained into the
bottom of the housing by a circular plastic bush behind where the
cutter/impeller mounts. Its a push-click fit. A rounded shoulder clicks
in the retain the bush. There was some RTV or similar to seal it. The
metal shaft will slide right out when the bush is removed. Has your
bottom bearing bush gone tight?
The shaft is tight .
behind the impeller there appears to be a metal sintered bearing
it looks like the flange has to be removed from outer shaft cover tube but
I dont know if it is threaded or shrink fit
FWIW with my really old one it's left hand threaded onto the tube.
That could be the case, it is old. I will try that
F
Fred
Guest
"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e698c$1@dnews.tpgi.com.au...
news:491e698c$1@dnews.tpgi.com.au...
FWIW with my really old one it's left hand threaded onto the tube.K Ludger wrote:
"F Murtz" <haggisz@hotmail.com> wrote in message
news:491e5656$1@dnews.tpgi.com.au...
Anyone tell me how to remove flange on bamix to allow dismantling?
If its like mine an old SB30-AA model the shaft is retained into the
bottom of the housing by a circular plastic bush behind where the
cutter/impeller mounts. Its a push-click fit. A rounded shoulder clicks
in the retain the bush. There was some RTV or similar to seal it. The
metal shaft will slide right out when the bush is removed. Has your
bottom bearing bush gone tight?
The shaft is tight .
behind the impeller there appears to be a metal sintered bearing
it looks like the flange has to be removed from outer shaft cover tube but
I dont know if it is threaded or shrink fit
P
Phil Allison
Guest
"F Murtz"
** I might be mistaken - but didn't former EA magazine editor Neville
Williams ( RIP) once appear in late night TV commercials demonstrating and
endorsing " Bamix " ??
Anyone confirm or deny?
...... Phil
Anyone tell me how to remove flange on bamix to allow dismantling?
** I might be mistaken - but didn't former EA magazine editor Neville
Williams ( RIP) once appear in late night TV commercials demonstrating and
endorsing " Bamix " ??
Anyone confirm or deny?
...... Phil