Automotive LED Light Modules

[K. Fields]

I have a working idea for making some LED Modules that I want to use
in my SUV for Car Shows. I want to use a 12 volt positive and ground
setup in a 3 by 3 LED configuration. I'm trying to figure out if I
should put the lights on a board or just wire them together. If I put
them on a board I don't know how to connect all of them. I know it
sounds easy to most people, but I'm working with an idea and I just
can't figure out how to do it. Any help or advise would be great.

K. Fields

 

[Rheilly Phoull]

"K. Fields" <fieldska@earthlink.net> wrote in message
news:41a23742.0408231838.158a8603@posting.google.com...

I have a working idea for making some LED Modules that I want to use
in my SUV for Car Shows. I want to use a 12 volt positive and ground
setup in a 3 by 3 LED configuration. I'm trying to figure out if I
should put the lights on a board or just wire them together. If I put
them on a board I don't know how to connect all of them. I know it
sounds easy to most people, but I'm working with an idea and I just
can't figure out how to do it. Any help or advise would be great.

K. Fields

For 12v use 3 leds wired in series (see below) with each "line" having a
resistor of about 150 ohms.
Really to calculate the actual value of the resistors we need to know more
details on the leds, like their forward voltage etc. but the principle would
be Ok with that value of resistor.
It would be easiest to mount them on a strip of "veroboard" or whatever it's
called in your part of the world but their are also printed circuit
boards now available to mount them on a conventional bulb base.
Looking at the figure below the ^ is led and the = is a resistor, each end
of a string would be connected together with the others and the anode ends
would go to positive (they are usually the longest lead.

..^..^..^..=..
..^..^..^..=..
..^..^..^..=..


--
Regards ........... Rheilly Phoull

 

[BobGardner]

12 volt positive and ground
setup in a 3 by 3 LED configuration.

3 leds in series with a resistor will run from 12V. Make 3 strings like that.