Audio output transformer location

[ŚŚŚSHAD0WŚŚŚ]

Is it better to mount the transformer on the printed wiring board or the speaker frame itself? I think the speaker is a better spot b/c it makes the board cheaper (less holes, less space) but will it adversely affect accoustics? I don't notice a difference.

 

[John Fields]

On Sun, 16 Jul 2006 08:40:26 GMT, ŚŚŚSHAD0WŚŚŚ
<none@noemailaddress.nospam> wrote:

Is it better to mount the transformer on the printed wiring board or
the speaker frame itself? I think the speaker is a better spot b/c
it makes the board cheaper (less holes, less space) but will it
adversely affect accoustics? I don't notice a difference.

---
If you mount it on the speaker frame the vibration can cause the
transformer to move, causing the windings to cut the lines of force
generated by the speaker's magnet, introducing distortion into the
system.


--
John Fields
Professional Circuit Designer

 

[ŚŚŚSHAD0WŚŚŚ]

So it is actually better to mount the transformer onto the PWB then. I have
come across it mounted to the speaker a lot on older radios though. They
sound so well compared to modern sets in my opinion that I thought this may
have been a better way to do it.


"John Fields" <jfields@austininstruments.com> wrote in message
news:5gbkb2la0eklnkfidelbv3lsca201dqaed@4ax.com...

On Sun, 16 Jul 2006 08:40:26 GMT, ŚŚŚSHAD0WŚŚŚ
none@noemailaddress.nospam> wrote:

Is it better to mount the transformer on the printed wiring board or
the speaker frame itself? I think the speaker is a better spot b/c
it makes the board cheaper (less holes, less space) but will it
adversely affect accoustics? I don't notice a difference.

---
If you mount it on the speaker frame the vibration can cause the
transformer to move, causing the windings to cut the lines of force
generated by the speaker's magnet, introducing distortion into the
system.


--
John Fields
Professional Circuit Designer