Audio and Video output from TV

[AP]

Hello, I am having problems trying to connect my tv to a digial surround
sound receiver(Marantz SR5500). My TV has input sockets only which are 2
scart, one s-video, composite video and left and right audio.
Is there anyway I change one of the inputs to become and output port?

Are there any other alternatives I could try?

Thanks
Andrew

 

[Kalman Rubinson]

On Tue, 28 Dec 2004 14:19:05 -0000, "AP" <thereis@noemail.com> wrote:

Hello, I am having problems trying to connect my tv to a digial surround
sound receiver(Marantz SR5500). My TV has input sockets only which are 2
scart, one s-video, composite video and left and right audio.
Is there anyway I change one of the inputs to become and output port?

Are there any other alternatives I could try?

Why don't you connect the sources to the reciever directly and run the
TV from its outputs? That's SOP.

Kal

 

[AP]

"Kalman Rubinson" <kr4@nyu.edu> wrote in message
news:1l23t0t2kpln7knlp2137pppb0gal3loc3@4ax.com...

On Tue, 28 Dec 2004 14:19:05 -0000, "AP" <thereis@noemail.com> wrote:

Hello, I am having problems trying to connect my tv to a digial surround
sound receiver(Marantz SR5500). My TV has input sockets only which are 2
scart, one s-video, composite video and left and right audio.
Is there anyway I change one of the inputs to become and output port?

Are there any other alternatives I could try?

Why don't you connect the sources to the reciever directly and run the
TV from its outputs? That's SOP.

Ahh, forgot to add something. I need to channel the input from the tv to the
receiver so that I can display the picture on a projector which is connected
to the receiver.

 

[Kalman Rubinson]

On Tue, 28 Dec 2004 17:39:40 -0000, "AP" <thereis@noemail.com> wrote:

Ahh, forgot to add something. I need to channel the input from the tv to the
receiver so that I can display the picture on a projector which is connected
to the receiver.

Ah. Tough luck. Can't you get another tuner for the projector?

Kal

 

[Jerry G.]

What you really need is the proper type of TV set. To have A/V outputs will
be an involved design add-on, that would not be feasible.

Another solution is to get a descent HiFi stereo VCR, and use it as a tuner
with its A/V outputs. Then you can feed your TV set from this, just for the
video portion.

--

Jerry G.
=====

"AP" <thereis@noemail.com> wrote in message
news:41d19a5f$0$16582$cc9e4d1f@news-text.dial.pipex.com...

"Kalman Rubinson" <kr4@nyu.edu> wrote in message
news:1l23t0t2kpln7knlp2137pppb0gal3loc3@4ax.com...

On Tue, 28 Dec 2004 14:19:05 -0000, "AP" <thereis@noemail.com> wrote:

Hello, I am having problems trying to connect my tv to a digial surround
sound receiver(Marantz SR5500). My TV has input sockets only which are 2
scart, one s-video, composite video and left and right audio.
Is there anyway I change one of the inputs to become and output port?

Are there any other alternatives I could try?

Why don't you connect the sources to the reciever directly and run the
TV from its outputs? That's SOP.

Ahh, forgot to add something. I need to channel the input from the tv to the
receiver so that I can display the picture on a projector which is connected
to the receiver.