A
anon
Guest
I'm using Synplify 7.2 Pro to synthesize a rather simple design for an
AT40K10AL component. My problem is thet Synplify likes to add a few
macros that Atmel doens't support directly in their IDS place and route
tool. These are, more spefically, the ldrasa and fdrasa cells. I
found that for Xilinx parts, Synplify ships with macros that can be
used by the Xilinx p/r tool, however I have found no such substitute
for Atmel devices.
Is anyone aware of a solution to this problem? Are there macros
available to solve the problem? or better yet, is there a way to tell
Synplify not to use certain types of cells when synthesizing?
Thank you.
--Greg
--
AT40K10AL component. My problem is thet Synplify likes to add a few
macros that Atmel doens't support directly in their IDS place and route
tool. These are, more spefically, the ldrasa and fdrasa cells. I
found that for Xilinx parts, Synplify ships with macros that can be
used by the Xilinx p/r tool, however I have found no such substitute
for Atmel devices.
Is anyone aware of a solution to this problem? Are there macros
available to solve the problem? or better yet, is there a way to tell
Synplify not to use certain types of cells when synthesizing?
Thank you.
--Greg
--