ASUS motherboard battery replacement?

R

root

Guest
A friend has an Asus P5N32-SLI motherboard. The battery
is held in a black plastic frame that grips the battery
in four places, say 2-4-8-10 o'clock on the battery.
At 6 o'clock on the battery are two little metal
spring clips. I don't see how to get the battery out
of the holder. The black plastic frame is an integral
part of the assembly, the tabs parts holding the
battery are part of the base.

Stenciling on the MB suggest that maybe the entire
assembly is to slide sideways, but I see no way
to effect this.

I am hoping that someone who has already faced this
problem will read this and give me a clue.

Thanks.
 
On Sun, 9 Oct 2011 23:27:23 +0000 (UTC), root <NoEMail@home.org>
wrote:

A friend has an Asus P5N32-SLI motherboard. The battery
is held in a black plastic frame that grips the battery
in four places, say 2-4-8-10 o'clock on the battery.
At 6 o'clock on the battery are two little metal
spring clips. I don't see how to get the battery out
of the holder. The black plastic frame is an integral
part of the assembly, the tabs parts holding the
battery are part of the base.

Stenciling on the MB suggest that maybe the entire
assembly is to slide sideways, but I see no way
to effect this.

I am hoping that someone who has already faced this
problem will read this and give me a clue.
Click to expand...
Huh? According to this review:
<http://www.motherboards.org/reviews/motherboards/1650_3.html>
the battery for the P5N32-SLI motherboard is quite conventional. Is
this what you're battery holder looks like, or is it something
different?
<http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1650_p3_14.jpg>
Push the battery towards the metal clip that makes the + contact and
it will fall out over the 2 black plastic tabs on the opposite side.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
On 10/09/2011 04:43 PM, Jeff Liebermann wrote:

On Sun, 9 Oct 2011 23:27:23 +0000 (UTC), root<NoEMail@home.org
wrote:

A friend has an Asus P5N32-SLI motherboard. The battery
is held in a black plastic frame that grips the battery
in four places, say 2-4-8-10 o'clock on the battery.
At 6 o'clock on the battery are two little metal
spring clips. I don't see how to get the battery out
of the holder. The black plastic frame is an integral
part of the assembly, the tabs parts holding the
battery are part of the base.

Stenciling on the MB suggest that maybe the entire
assembly is to slide sideways, but I see no way
to effect this.

I am hoping that someone who has already faced this
problem will read this and give me a clue.

Huh? According to this review:
http://www.motherboards.org/reviews/motherboards/1650_3.html
the battery for the P5N32-SLI motherboard is quite conventional. Is
this what you're battery holder looks like, or is it something
different?
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1650_p3_14.jpg
Push the battery towards the metal clip that makes the + contact and
it will fall out over the 2 black plastic tabs on the opposite side.
Click to expand...
This one is different. Pix here:

<http://www1.snapfish.com/snapfish/thumbnailshare/AlbumID=4399662016/a=3848097_3848097/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfish/>

--
Cheers, Bev
_|-_|-_|-_|-_|-_|-_|-_|-_|-_|-_|-_|-_
Too many freaks, not enough circuses.
 
On 10/09/2011 05:24 PM, The Real Bev wrote:

On 10/09/2011 04:43 PM, Jeff Liebermann wrote:

On Sun, 9 Oct 2011 23:27:23 +0000 (UTC), root<NoEMail@home.org
wrote:

A friend has an Asus P5N32-SLI motherboard. The battery
is held in a black plastic frame that grips the battery
in four places, say 2-4-8-10 o'clock on the battery.
At 6 o'clock on the battery are two little metal
spring clips. I don't see how to get the battery out
of the holder. The black plastic frame is an integral
part of the assembly, the tabs parts holding the
battery are part of the base.

Stenciling on the MB suggest that maybe the entire
assembly is to slide sideways, but I see no way
to effect this.

I am hoping that someone who has already faced this
problem will read this and give me a clue.

Huh? According to this review:
http://www.motherboards.org/reviews/motherboards/1650_3.html
the battery for the P5N32-SLI motherboard is quite conventional. Is
this what you're battery holder looks like, or is it something
different?
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1650_p3_14.jpg
Push the battery towards the metal clip that makes the + contact and
it will fall out over the 2 black plastic tabs on the opposite side.

This one is different. Pix here:

http://www1.snapfish.com/snapfish/thumbnailshare/AlbumID=4399662016/a=3848097_3848097/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfish/
Click to expand...
Or here:
<http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?

--
Cheers,
Bev
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
"I've seen a look in dogs' eyes, a quickly vanishing look
of amazed contempt, and I am convinced that basically dogs
think humans are nuts." -- John Steinbeck
 
On Sun, 09 Oct 2011 18:02:51 -0700, The Real Bev
<bashley101@gmail.com> wrote:

Or here:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?
Click to expand...
I don't see a connection between the little metal clip on the left and
the + side of the battery:
<http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?action=view&current=batt2.jpg>
The battery may actually be good if the contact is not making a good
connection. A voltmeter will tell all.

My guess(tm) is that the two plastic clips on the side opposite the
metal clip will bend out of the way, releasing the battery. Wrap some
tape around the tip of a small screwdriver, shove it in the space
between the two plastic clips opposite the metal clip, and pry away
from the battery. The plastic clips should bend, releasing the
battery.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
Jeff Liebermann <jeffl@cruzio.com> wrote:
On Sun, 09 Oct 2011 18:02:51 -0700, The Real Bev
bashley101@gmail.com> wrote:

Or here:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?

I don't see a connection between the little metal clip on the left and
the + side of the battery:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?action=view&current=batt2.jpg
The battery may actually be good if the contact is not making a good
connection. A voltmeter will tell all.

My guess(tm) is that the two plastic clips on the side opposite the
metal clip will bend out of the way, releasing the battery. Wrap some
tape around the tip of a small screwdriver, shove it in the space
between the two plastic clips opposite the metal clip, and pry away
from the battery. The plastic clips should bend, releasing the
battery.
Click to expand...
There is simply no way the battery can come out from the top.
The four tabs on the mounting are an integral part of the
housing and cover too much of the battery to allow that.
I'll try to find some place to connect a voltmeter, but
the battery won't keep the date. It is five or six years
old. Most batteries last longer than that, but, who knows?
 
root Inscribed thus:

Jeff Liebermann <jeffl@cruzio.com> wrote:
On Sun, 09 Oct 2011 18:02:51 -0700, The Real Bev
bashley101@gmail.com> wrote:

Or here:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?

I don't see a connection between the little metal clip on the left
and the + side of the battery:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?action=view&current=batt2.jpg
The battery may actually be good if the contact is not making a good
connection. A voltmeter will tell all.

My guess(tm) is that the two plastic clips on the side opposite the
metal clip will bend out of the way, releasing the battery. Wrap
some tape around the tip of a small screwdriver, shove it in the
space between the two plastic clips opposite the metal clip, and pry
away
from the battery. The plastic clips should bend, releasing the
battery.


There is simply no way the battery can come out from the top.
The four tabs on the mounting are an integral part of the
housing and cover too much of the battery to allow that.
I'll try to find some place to connect a voltmeter, but
the battery won't keep the date. It is five or six years
old. Most batteries last longer than that, but, who knows?
Click to expand...
Jeff is right ! A small screwdriver inserted down the edge of the
battery opposite to the gap on the other side, gently lever the battery
towards the gap and it will jump out. Make sure that there is no power
to the machine, because the battery can land anywhere on the mainboard.

Fitting the new battery, insert the edge against the holder rim under
the two clips opposite the gap, making sure that the battery is the
correct way up, and press down until it clips into the holder.

Job done... :)

--
Best Regards:
Baron.
 
In article <j6uhka$7l7$1@dont-email.me>, baron@linuxmaniac.net says...
root Inscribed thus:

Jeff Liebermann <jeffl@cruzio.com> wrote:
On Sun, 09 Oct 2011 18:02:51 -0700, The Real Bev
bashley101@gmail.com> wrote:

Or here:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?

I don't see a connection between the little metal clip on the left
and the + side of the battery:
http://s21.photobucket.com/albums/b293/bashley1000/Asus%20Battery/?action=view&current=batt2.jpg
The battery may actually be good if the contact is not making a good
connection. A voltmeter will tell all.

My guess(tm) is that the two plastic clips on the side opposite the
metal clip will bend out of the way, releasing the battery. Wrap
some tape around the tip of a small screwdriver, shove it in the
space between the two plastic clips opposite the metal clip, and pry
away
from the battery. The plastic clips should bend, releasing the
battery.


There is simply no way the battery can come out from the top.
The four tabs on the mounting are an integral part of the
housing and cover too much of the battery to allow that.
I'll try to find some place to connect a voltmeter, but
the battery won't keep the date. It is five or six years
old. Most batteries last longer than that, but, who knows?

Jeff is right ! A small screwdriver inserted down the edge of the
battery opposite to the gap on the other side, gently lever the battery
towards the gap and it will jump out. Make sure that there is no power
to the machine, because the battery can land anywhere on the mainboard.

Fitting the new battery, insert the edge against the holder rim under
the two clips opposite the gap, making sure that the battery is the
correct way up, and press down until it clips into the holder.

Job done... :)
Click to expand...
I usually just release the battery from the metal tab edge. It will pop
out using that method as well.

- Tim -
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top