Astron RS-50A Power Supply

[George S]

Someone gave me a Astron RS-50A power supply. The largest capacitor in it
has been overheated at sometime and the positive post is loose in it. The
power supply still produces 13.6 volts, but I didn't test it with a load. I
tried to email Astron from their website for information and my email
bounced back.
Does anyone know what size and value these large caps are or how to find
out?
Thanks, George

 

[Zeljko]

"George S" <george996@_NO_SPAM_olypen.com> wrote in message
news:108sf6erqd9a1ca@corp.supernews.com...

Does anyone know what size and value these large caps are or how to find
out?
Thanks, George

Look here...

http://www.repeater-builder.com/rbtip/astron-index.html

....for schematic.

Zeljko

 

On Tue, 27 Apr 2004 03:57:48 -0700, "George S"
<george996@_NO_SPAM_olypen.com> wrote:

Someone gave me a Astron RS-50A power supply. The largest capacitor in it
has been overheated at sometime and the positive post is loose in it. The
power supply still produces 13.6 volts, but I didn't test it with a load. I
tried to email Astron from their website for information and my email
bounced back.
Does anyone know what size and value these large caps are or how to find
out?
Thanks, George

The RS-70A uses a 2200uf cap at 16 volts. It probably is the same for

the 50.

 

On Tue, 27 Apr 2004 03:57:48 -0700, "George S"
<george996@_NO_SPAM_olypen.com> wrote:

Someone gave me a Astron RS-50A power supply. The largest capacitor in it
has been overheated at sometime and the positive post is loose in it. The
power supply still produces 13.6 volts, but I didn't test it with a load. I
tried to email Astron from their website for information and my email
bounced back.
Does anyone know what size and value these large caps are or how to find
out?
Thanks, George

The RS-70A uses a 2200uf cap at 16 volts. It probably is the same for the 50.

CORRECTION. Upon further investigation with a better print, this time
a RS-35A, the cap is a 2200uf at 18volts.

 

[George S]

Thank you for the link. It had the schematic for the RS-50 and the cap I
need is a 100K 25 volt. It is a only about 3 5/8" tall and 2" wide so I'm
looking through my supplier catalogs now.
George

"Zeljko" <zeljko.hrvoj@zg.htnet.hr> wrote in message
news:c6md21$8qv$1@ls219.htnet.hr...

"George S" <george996@_NO_SPAM_olypen.com> wrote in message
news:108sf6erqd9a1ca@corp.supernews.com...
Does anyone know what size and value these large caps are or how to find
out?
Thanks, George



Look here...

http://www.repeater-builder.com/rbtip/astron-index.html

...for schematic.

Zeljko