Anyone know where to find a Crosley Model 23 Dial Cord diagr

Guest
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?
 
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?
Click to expand...
buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.
 
On 2018/12/01 11:57 PM, Sjouke Burry wrote:
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?

buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.
Click to expand...

I have NOS Centralab and IRC stackable potentiometers and switches that
I hope to be postng on my web site soonish. This is where you build a
volume control using the various controls, shafts and switches to get
what you need.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
http://www.nucow.com/alldial.htm Here

But, you will find that most of them are quite intuitive. No radio manufacturer wanted this to be complicated - complication takes time.


Peter Wieck
Melrose Park, PA
 
On Sunday, December 2, 2018 at 3:08:08 AM UTC-5, John Robertson wrote:
On 2018/12/01 11:57 PM, Sjouke Burry wrote:
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration......
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?

buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.

I have NOS Centralab and IRC stackable potentiometers and switches that
I hope to be postng on my web site soonish. This is where you build a
volume control using the various controls, shafts and switches to get
what you need.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Click to expand...

Back in the old days, we'd always use the OEM switch/control assy when the part store had them, but there were so many different types that often the OEMs weren't available, so the counter guy would go through the Centralab book, and come to the counter with a collection of parts and we'd assemble the control right there. The only two issues were that we'd often have to cut the shaft down a bit to make the length correct and the universal snap in shaft had a bit of tactile free play that the OEM didn't, but otherwise it was a fast and long term solution as the Centralab stuff was well made. BTW, was CTS a different company or the same as Centralab?
 
Hi there,

CTS (Chicago Telephone Supply) is a different company. You can find a
company history, in annoying reverse order, so you have to scoll from
the bottom up, here:

https://www.ctscorp.com/company/history/

Regards,
Tim


On 12/3/2018 8:12 AM, John-Del wrote:
On Sunday, December 2, 2018 at 3:08:08 AM UTC-5, John Robertson wrote:
On 2018/12/01 11:57 PM, Sjouke Burry wrote:
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?

buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.

I have NOS Centralab and IRC stackable potentiometers and switches that
I hope to be postng on my web site soonish. This is where you build a
volume control using the various controls, shafts and switches to get
what you need.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


Back in the old days, we'd always use the OEM switch/control assy when the part store had them, but there were so many different types that often the OEMs weren't available, so the counter guy would go through the Centralab book, and come to the counter with a collection of parts and we'd assemble the control right there. The only two issues were that we'd often have to cut the shaft down a bit to make the length correct and the universal snap in shaft had a bit of tactile free play that the OEM didn't, but otherwise it was a fast and long term solution as the Centralab stuff was well made. BTW, was CTS a different company or the same as Centralab?
Click to expand...
 
Hi there,

CTS (Chicago Telephone Supply) is a different company. You can find a
company history, in annoying reverse order, so you have to scroll from
the bottom up, here:

https://www.ctscorp.com/company/history/

Regards,
Tim


On 12/3/2018 8:12 AM, John-Del wrote:
On Sunday, December 2, 2018 at 3:08:08 AM UTC-5, John Robertson wrote:
On 2018/12/01 11:57 PM, Sjouke Burry wrote:
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?

buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.

I have NOS Centralab and IRC stackable potentiometers and switches that
I hope to be postng on my web site soonish. This is where you build a
volume control using the various controls, shafts and switches to get
what you need.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


Back in the old days, we'd always use the OEM switch/control assy when the part store had them, but there were so many different types that often the OEMs weren't available, so the counter guy would go through the Centralab book, and come to the counter with a collection of parts and we'd assemble the control right there. The only two issues were that we'd often have to cut the shaft down a bit to make the length correct and the universal snap in shaft had a bit of tactile free play that the OEM didn't, but otherwise it was a fast and long term solution as the Centralab stuff was well made. BTW, was CTS a different company or the same as Centralab?
Click to expand...
 
On 12/01/18 23:57, Sjouke Burry wrote:
On 2-12-2018 7:30, tubeguy@myshop.com wrote:
Anyone know where to find a Crosley Model 23 Dial Cord diagram?
The cord is mostly gone, so I cant just duplicate the olds one ....

Dial cord replacement is NOT my favorite part of radio restoration.....
But it's got to be done...... This oldie has a beautiful wooden cabinet
in fair shape. I will be applying some new finish to to the cabinet. The
radio works but hums, new filter caps are ordered. The only other broken
item is the power switch on the rear of the volume pot, was fried, and
left a burn mark on the chassis (before I got the radio). I doubt I will
find one, so I will likely just use an inline power cord switch.

This is a 1941 radio. Google found me a schematic but not a dial cord
diagram.

Just for grins, how does a person find a replacement pot switch that
will fit?

buy a few garage sale radios, A lot of them use the same pot/switch.
Also found in other old audio stuff.
Click to expand...

another possibility is guitar amplifier parts, like at 'amplifiedparts.com'

this search resulted in several hits, maybe one will work?
https://www.amplifiedparts.com/search/node/switch?cats%5B0%5D=147


--
(aka 'Bombastic Bob' in case you wondered)

'Feeling with my fingers, and thinking with my brain' - me
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top