an improved electrical resistor

[mm]

Middle sentence of second paragraph is the most relevant.


Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

---------------

So how can one improve an electrical resistor?

 

[Boris Mohar]

On Tue, 17 May 2011 06:41:40 -0400, mm <NOPSAMmm2005@bigfoot.com> wrote:

Middle sentence of second paragraph is the most relevant.


Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

---------------

So how can one improve an electrical resistor?

Stability and tolerance comes to mind.
--
Boris

 

[abrsvc]

On May 17, 6:41 am, mm <NOPSAMmm2...@bigfoot.com> wrote:

Middle sentence of second paragraph is the most relevant.

Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

 ---------------

So how can one improve an electrical resistor?

A careful read of the actual patent filed for this "improved resistor"
shows that the improvement was more for reliability and ease of
manufacture. This also implies that the cost would be minimized for
the more accurate resistors (1% etc).
Search the web for patent #2972726 for more details. The patent
itself is 4 pages and was dated 2/21/1961.

Dan

 

[Sjouke Burry]

mm wrote:

Middle sentence of second paragraph is the most relevant.


Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

---------------

So how can one improve an electrical resistor?
!:better stability

2:lower temperature coefficient
3:mechanically stronger.
4:Less ageing.
5:higher admissable peak voltage/current.

Warn us when you produce something like that.....

 

[Dave Platt]

In article <q2k4t69hhc45iahc5id50shdubtl38qf3s@4ax.com>,
mm <NOPSAMmm2005@bigfoot.com> wrote:

So how can one improve an electrical resistor?

A change of materials might allow a resistor of a given physical
size to dissipate heat more effectively, or run at a higher body
temperature without damage or change-of-value, or survive a
catastrophic fault better (e.g. "flame-proof" construction), or be
less expensive to manufacture.

--
Dave Platt <dplatt@radagast.org> AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

 

[spamtrap1888]

On May 17, 10:04 am, Sjouke Burry <burrynulnulf...@ppllaanneett.nnll>
wrote:

mm wrote:
Middle sentence of second paragraph is the most relevant.

Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

 ---------------

So how can one improve an electrical resistor?

!:better stability
2:lower temperature coefficient
3:mechanically stronger.
4:Less ageing.
5:higher admissable peak voltage/current.

Warn us when you produce something like that.....

The invention was easier to manufacture while simultaneously lowering
both self-inductance and self-capacitance.

 

[spamtrap1888]

On May 17, 3:41 am, mm <NOPSAMmm2...@bigfoot.com> wrote:

Middle sentence of second paragraph is the most relevant.

Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

This is a bit misleading, because Boykin was a grad student at IIT
from 1946 to 1947. Around that time, he formed the Boykin-Fruth
corporation with fellow inventor Hal Frederick Fruth, PhD. (Dr. Fruth,
a physicist, was perhaps best known today for telling W. Edwards
Deming that Western Electric might pay him as much as $5000 a year
when he got his PhD, but that they were looking for men who would be
worth $50K a year to them.)

 

[mm]

On Tue, 17 May 2011 19:04:15 +0200, Sjouke Burry
<burrynulnulfour@ppllaanneett.nnll> wrote:

mm wrote:
Middle sentence of second paragraph is the most relevant.


Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.

Boykin, in his lifetime, ultimately invented more than 25 electronic
devices. One of his early inventions was an improved electrical
resistor for computers, radios, televisions and an assortment of other
electronic devices. Other notable inventions include a variable
resistor used in guided missiles and small component thick-film
resistors for computers.[2]

---------------

So how can one improve an electrical resistor?
!:better stability
2:lower temperature coefficient
3:mechanically stronger.
4:Less ageing.
5:higher admissable peak voltage/current.

I must have really low standards if I didnt think of any of these.
My ex-girlfriend tells me that's what I have.

Warn us when you produce something like that.....

Okay.

 

[mm]

On Tue, 17 May 2011 12:23:22 -0700 (PDT), spamtrap1888
<spamtrap1888@gmail.com> wrote:

On May 17, 3:41 am, mm <NOPSAMmm2...@bigfoot.com> wrote:
Middle sentence of second paragraph is the most relevant.

Otis Frank Boykin was born in 1920 in Dallas, Texas. His mother was a
homemaker and his father was a carpenter. He worked as a laboratory
assistant at the nearby University's aerospace laboratory. Otis
attended Fisk University and Illinois Institute of Technology, but
dropped out after two years because his parents could not afford his
tuition.


This is a bit misleading, because Boykin was a grad student at IIT
from 1946 to 1947.

So he had graduated from Fisk. Yes, definitely misleading. Although
now I do see that it could mean what you say , I thought he only had
two years of post-high school. Six years is a lot more. Wikipedia
often has paragraphs out of chronlogical order and hard to follow, or
even conflicting paragraphs, written by different people, I guess.

Around that time, he formed the Boykin-Fruth
corporation with fellow inventor Hal Frederick Fruth, PhD. (Dr. Fruth,
a physicist, was perhaps best known today for telling W. Edwards
Deming that Western Electric might pay him as much as $5000 a year
when he got his PhD, but that they were looking for men who would be
worth $50K a year to them.)

Hmmm.

Thanks all.

Boykin was black, btw. Fisk is a historically black college.

 

[mm]

On Tue, 17 May 2011 16:12:40 -0700 (PDT), spamtrap1888
<spamtrap1888@gmail.com> wrote:

On May 17, 3:28 pm, mm <NOPSAMmm2...@bigfoot.com> wrote:


Boykin was black, btw.  Fisk is a historically black college.

There are a lot of hits for him in "famous black people" sites, some
of which make a variety of improbable claims*. He did receive a dozen
patents, mostly for CTS (originally Chicago Telephone Supply). When
CTS moved to Indiana, Boykin stayed in Chicago -- perhaps educated
blacks weren't welcome in Indiana**.

The Klan was big in parts of Indiana, mostly the southern half. While
schools in Indianapolis weren't officially segregated against Blacks,
they created a high school just for Blacks to suck up most of them and
keep them out of the other schools, and black students from other high
schools were forced to attend Crispus Attucks H.S. It accepted its
first white students in 1967.

One patent lists his address as
8251 S. Maryland, which I note is a three-flat according to the pic at
the Cook County assessor site.

*Improbable that Boykin invented the pacemaker or a guided missile,

It didn't say that in the wikip page,
http://en.wikipedia.org/wiki/Otis_Boykin only that he invented a
valuable part.

It shows "An ink drawing of Otis Boykin from a U.S. Department of
Energy biographical sketch of 1979." on which is written "Electronic
Devices for heart stimulators and guided missiles.

or
that pot fueled his inventiveness.

LOL I think pot refers to potentiometer. "Other notable inventions
include a variable resistor used in guided missiles"

**Pioneer hormone synthesizer, Percy Julian, had to leave Indiana to
find work, ending up at the Glidden Paint company in Chicago.

 

[spamtrap1888]

On May 17, 3:28 pm, mm <NOPSAMmm2...@bigfoot.com> wrote:

Boykin was black, btw.  Fisk is a historically black college.

There are a lot of hits for him in "famous black people" sites, some
of which make a variety of improbable claims*. He did receive a dozen
patents, mostly for CTS (originally Chicago Telephone Supply). When
CTS moved to Indiana, Boykin stayed in Chicago -- perhaps educated
blacks weren't welcome in Indiana**. One patent lists his address as
8251 S. Maryland, which I note is a three-flat according to the pic at
the Cook County assessor site.

*Improbable that Boykin invented the pacemaker or a guided missile, or
that pot fueled his inventiveness.

**Pioneer hormone synthesizer, Percy Julian, had to leave Indiana to
find work, ending up at the Glidden Paint company in Chicago.

 

[Franc Zabkar]

On Tue, 17 May 2011 18:23:23 -0400, mm <NOPSAMmm2005@bigfoot.com> put
finger to keyboard and composed:

I must have really low standards ...
My ex-girlfriend tells me that's what I have.

Did you trade up to a girlfriend of a higher standard? ;-)

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.