AMS simulation error

[dinac]

Hi all,

I am using IUS82, MMSIM 711, IC 6.1.3

I am trying to simulate a co-simulation of vhdl, verilog, and spectre
in config view.
The simulation stops with this errors (attached the part of the log
file below)

Thanks a lot for your help

Cheers
Dinac

********************************************************************************
.........
........
ncvlog: Memory Usage - 9.5M program + 8.7M data = 18.2M total
ncvlog: CPU Usage - 0.0s system + 0.0s user = 0.0s total (0.0s, 90.4%
cpu)
Successfully compiled ('mixspi_vco' 'top_design' 'schematic').
Compilation successful.
ncelab(64): 08.20-s018: (c) Copyright 1995-2009 Cadence Design
Systems, Inc.
ncelab: *E,NOUNIT: Unable to find a unit named
'mixspi_vco.top_design:schematic' in the libraries.
ncelab: *E,NOUNIT: Unable to find a unit named
'mixspi_vco.cds_globals:top_design_
config_design_SPI_VCO' in the libraries.
ncelab: Memory Usage - 24.1M program + 21.4M data = 45.4M total
ncelab: CPU Usage - 0.0s system + 0.0s user = 0.0s total (0.0s, 78.3%
cpu)
Failed to elaborate ("mixspi_vco" "top_design"
"config_design_SPI_VCO").

 

[Andrew Beckett]

dinac wrote, on 01/13/10 09:30:

Hi all,

I am using IUS82, MMSIM 711, IC 6.1.3

I am trying to simulate a co-simulation of vhdl, verilog, and spectre
in config view.
The simulation stops with this errors (attached the part of the log
file below)

Thanks a lot for your help

Cheers
Dinac

********************************************************************************
........
.......
ncvlog: Memory Usage - 9.5M program + 8.7M data = 18.2M total
ncvlog: CPU Usage - 0.0s system + 0.0s user = 0.0s total (0.0s, 90.4%
cpu)
Successfully compiled ('mixspi_vco' 'top_design' 'schematic').
Compilation successful.
ncelab(64): 08.20-s018: (c) Copyright 1995-2009 Cadence Design
Systems, Inc.
ncelab: *E,NOUNIT: Unable to find a unit named
'mixspi_vco.top_design:schematic' in the libraries.
ncelab: *E,NOUNIT: Unable to find a unit named
'mixspi_vco.cds_globals:top_design_
config_design_SPI_VCO' in the libraries.
ncelab: Memory Usage - 24.1M program + 21.4M data = 45.4M total
ncelab: CPU Usage - 0.0s system + 0.0s user = 0.0s total (0.0s, 78.3%
cpu)
Failed to elaborate ("mixspi_vco" "top_design"
"config_design_SPI_VCO").

Too little information, I'm afraid.

Can you contact Cadence Customer Support - we can then guide you through
providing all the right information, or maybe take a look at your setup remotely.

Regards,

Andrew.

 

[dinac]

Andrew thanks for your reply.
Made some trials, the simulation succeeds with IUS82 32bit with AMS
environment. But the simulation with ADE stops with another error
messages.
Mean while, I will try to contact the cadence support team soon

Thanks a lot

Cheers
Dinac

**************************
ncvhdl: 08.20-s018: (c) Copyright 1995-2009 Cadence Design Systems,
Inc.
.../spi_digi/spislave14/entity/vhdl.vhms:
USE work.SPIpkg14.ALL;
|
ncvhdl_p: *E,SELLIB (../spi_digi/spislave14/entity/vhdl.vhms,59|8):
unit (SPIPKG14) not found in library (SPI_DIGI).
addr : OUT STD_LOGIC_ADDR; -- register address
|
ncvhdl_p: *E,IDENTU (../spi_digi/spislave14/entity/vhdl.vhms,69|28):
identifier (STD_LOGIC_ADDR) is not declared [10.3].
data_wr : OUT STD_LOGIC_DATA; -- data bus for writing register
|
ncvhdl_p: *E,IDENTU (../spi_ihpdigi/spislave14/entity/vhdl.vhms,72|
28): identifier (STD_LOGIC_DATA) is not declared [10.3].
data_rd : IN STD_LOGIC_DATA); -- data bus for reading register
|
ncvhdl_p: *E,IDENTU (../spi_digi/spislave14/entity/vhdl.vhms,73|28):
identifier (STD_LOGIC_DATA) is not declared [10.3].
ncvhdl_p: *W,DLMKSL: Unable to build source link ../spi_digi/
spislave14/entity/vhdl.vhms (File exists).
errors: 4, warnings: 1
ncvhdl_p: Memory Usage - 8.3M program + 5.1M data = 13.4M total
ncvhdl: CPU Usage - 0.0s system + 0.0s user = 0.0s total (0.1s, 28.0%
cpu)
Failed to compile ('spi_digi' 'spislave14' 'entity').
ncvhdl: 08.20-s018: (c) Copyright 1995-2009 Cadence Design Systems,
Inc.
...........
..........
.....................