AMBA DesignWare IP from Verilog?

[Connie L. O'Dell]

Hi,
I am curious of any experience you may have (success/failure) in
the use of Synopsys's DesignWare AMBA IP from a Verilog testbench, and
also if there are environments it works better from, like if it works
better with Vera, or from the C interface.
Another alternative we could explore would be the System C AMBA
models from ARM, if that has proven more successful. We already use
testBuilder, so we aren't afraid of System C

Cheers,
Connie L. O'Dell
Sr. Verification Consultant
c.odell@co-consulting.net
303-641-5191
________________________________________________________
CO Consulting Boulder, CO http://co-consulting.net

 

[Ulf Samuelsson]

"Connie L. O'Dell" <c.odell@ieee.org> skrev i meddelandet
news:a108192d.0405061529.2c602857@posting.google.com...

Hi,
I am curious of any experience you may have (success/failure) in
the use of Synopsys's DesignWare AMBA IP from a Verilog testbench, and
also if there are environments it works better from, like if it works
better with Vera, or from the C interface.
Another alternative we could explore would be the System C AMBA
models from ARM, if that has proven more successful. We already use
testBuilder, so we aren't afraid of System C

Cheers,
Connie L. O'Dell
Sr. Verification Consultant
c.odell@co-consulting.net
303-641-5191
________________________________________________________
CO Consulting Boulder, CO http://co-consulting.net

You may want to talk to your friendly local ASIC vendor as well.
I know that Atmel has equivalent circuits and you would not pay any money to
ARM for that.

--
Best Regards,
Ulf Samuelsson ulf@a-t-m-e-l.com
This is a personal view which may or may not be
share by my Employer Atmel Nordic AB