Altium Designer - connection color

[OZ8HP - Hugo Pedersen]

Is there a method for changing the default color of a netlist connection?
The 'sandy' color can be difficult to see on the black background i the PCB
editor.
You can manualy change the color of each net connection, but a way to change
globaly or by default would be nice.

--

/* Vy 73 de OZ8HP / OZ1IIQ
/* Hugo Pedersen
/* http://www.hugopedersen.dk

 

[Darren]

Hi Hugo,

You can change the default colour used in the layers dialog, this
needs to been done before the netlist is loaded to have an effect.

Else you will have to do it on an net by net basis from the pcb panel.

Darren


"OZ8HP - Hugo Pedersen" <mail@hugopedersen.dk> wrote in message
news:463ba155$0$78958$edfadb0f@dread16.news.tele.dk...

Is there a method for changing the default color of a netlist connection?
The 'sandy' color can be difficult to see on the black background i the
PCB editor.
You can manualy change the color of each net connection, but a way to
change globaly or by default would be nice.

--

/* Vy 73 de OZ8HP / OZ1IIQ
/* Hugo Pedersen
/* http://www.hugopedersen.dk

 

[Marra]

You could alter the contrast or brightness on your monitor !