T
thamarai selvan
Guest
why the AC current or vaoltage is represented in rms values ,why DC
current or voltage is represented so.
current or voltage is represented so.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
T
Tom Biasi
Guest
"thamarai selvan" <selvanrocksu@gmail.com> wrote in message
news:4b8bba08-4f2e-4e20-a2c8-e1339c872a2b@2g2000hsn.googlegroups.com...
Tom
news:4b8bba08-4f2e-4e20-a2c8-e1339c872a2b@2g2000hsn.googlegroups.com...
what RMS means.why the AC current or vaoltage is represented in rms values ,why DC
current or voltage is represented so.
The purpose of the current is to allow some work to be done. Please look up
Tom
B
Bob Masta
Guest
On Wed, 2 Apr 2008 02:16:23 -0700 (PDT), thamarai selvan
<selvanrocksu@gmail.com> wrote:
load as a DC voltage of that value.
Best regards,
Bob Masta
DAQARTA v3.50
Data AcQuisition And Real-Time Analysis
www.daqarta.com
Scope, Spectrum, Spectrogram, FREE Signal Generator
Science with your sound card!
<selvanrocksu@gmail.com> wrote:
The RMS voltage gives the same equivalent power in a purely resistivewhy the AC current or vaoltage is represented in rms values ,why DC
current or voltage is represented so.
load as a DC voltage of that value.
Best regards,
Bob Masta
DAQARTA v3.50
Data AcQuisition And Real-Time Analysis
www.daqarta.com
Scope, Spectrum, Spectrogram, FREE Signal Generator
Science with your sound card!
T
terryS
Guest
On Apr 2, 7:16 am, thamarai selvan <selvanroc...@gmail.com> wrote:
This is how I have understood it.
Draw a sine wave. Look at it.
Notice how the voltage (or current) starts at zero, peaks (to 1.41
times the RMS value) positive goes to zero and then peaks 1.41 times
RMS negative.
The RMS (Root Mean Square) value of the area within the sine wave can
do the same amount of work (supply the same amount of power etc.) as a
steady state DC voltage (or current) with the same value.
For example suppose a DC value is say a steady unchanging 100.
The equivalent sine wave would start at zero, rise to +141, decline to
zero and then decline to -141.
The RMS value of that rising and falling (alternating polarity voltage
or current) would be the same; i.e. 100.
A better explanation should be in any basic text book.
Have fun.
Thamara:why the AC current or vaoltage is represented in rms values ,why DC
current or voltage is represented so.
This is how I have understood it.
Draw a sine wave. Look at it.
Notice how the voltage (or current) starts at zero, peaks (to 1.41
times the RMS value) positive goes to zero and then peaks 1.41 times
RMS negative.
The RMS (Root Mean Square) value of the area within the sine wave can
do the same amount of work (supply the same amount of power etc.) as a
steady state DC voltage (or current) with the same value.
For example suppose a DC value is say a steady unchanging 100.
The equivalent sine wave would start at zero, rise to +141, decline to
zero and then decline to -141.
The RMS value of that rising and falling (alternating polarity voltage
or current) would be the same; i.e. 100.
A better explanation should be in any basic text book.
Have fun.