Alliance Tenna Rotor Parts ?????

Guest
I posted this a few weeks ago, I did not get any response.
Does anyone have any idea? Please.....

---
Need Rubber Seal for ALLIANCE TENNA-ROTOR

On top of my Aliance Tenna-Rotor (tv antenna rotor), there used to be
a rubber seal to keep water out of the motor. I found it on the
ground under the antenna, in 2 pieces. I guess it dried up and
cracked. It just slips over the upper pipe piece, (externally on top
of rotor) and is tapered to shed water. Does anyone know where I can
get a replacement? -OR- Has anyone ever made one from a plumbing
washer or something like that?

Thanks for all help.

Greg
 
Look at the tapered roof water deflector for plumbing vent pipes
which can be cut and superglued/Shoe-Gooed to fit. I have an
old house that had a brass tube for a vent that was a little bit
too small for standard deflectors, and ended up cutting and glueing.

<greg@UNLISTED.com> wrote in message
news:7vi0tvs1sqiakt6s10erkona2uvenf8hug@4ax.com...
I posted this a few weeks ago, I did not get any response.
Does anyone have any idea? Please.....

---
Need Rubber Seal for ALLIANCE TENNA-ROTOR

On top of my Aliance Tenna-Rotor (tv antenna rotor), there used to
be
a rubber seal to keep water out of the motor. I found it on the
ground under the antenna, in 2 pieces. I guess it dried up and
cracked. It just slips over the upper pipe piece, (externally on
top
of rotor) and is tapered to shed water. Does anyone know where I
can
get a replacement? -OR- Has anyone ever made one from a plumbing
washer or something like that?

Thanks for all help.

Greg
Click to expand...
 
try this guy

http://users.erols.com/shiacawn/rotors/alliance.htm


On Fri, 5 Dec 2003 09:32:48 -0600, "Johnboy" <jondne@knology.net>
wrote:

Look at the tapered roof water deflector for plumbing vent pipes
which can be cut and superglued/Shoe-Gooed to fit. I have an
old house that had a brass tube for a vent that was a little bit
too small for standard deflectors, and ended up cutting and glueing.

greg@UNLISTED.com> wrote in message
news:7vi0tvs1sqiakt6s10erkona2uvenf8hug@4ax.com...
I posted this a few weeks ago, I did not get any response.
Does anyone have any idea? Please.....

---
Need Rubber Seal for ALLIANCE TENNA-ROTOR

On top of my Aliance Tenna-Rotor (tv antenna rotor), there used to
be
a rubber seal to keep water out of the motor. I found it on the
ground under the antenna, in 2 pieces. I guess it dried up and
cracked. It just slips over the upper pipe piece, (externally on
top
of rotor) and is tapered to shed water. Does anyone know where I
can
get a replacement? -OR- Has anyone ever made one from a plumbing
washer or something like that?

Thanks for all help.

Greg
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top