Alchemist Kraken amp power supply

[darren]

Hi
I have an Alchemist Kraken APD6A Mk2 amp. It is set up to run the
speakers throughout a house that a friend recently purchased. It needs
an external power supply but this is missing.

Has anyone got any information on the power requirements for this unit.
the supply connects through a 6 pin din with 5 pines used. It looks like
the external supply needs to be a split supply. The only clue on the
board is that the electros on the supply side are 35v 1000uf by 3 each
side, so the supply should be somewhere below +35 0 -35

 

[Trevor Wilson]

On 7/11/2012 10:21 PM, darren wrote:

Hi
I have an Alchemist Kraken APD6A Mk2 amp. It is set up to run the
speakers throughout a house that a friend recently purchased. It needs
an external power supply but this is missing.

Has anyone got any information on the power requirements for this
unit. the supply connects through a 6 pin din with 5 pines used. It
looks like the external supply needs to be a split supply. The only clue
on the board is that the electros on the supply side are 35v 1000uf by
3 each side, so the supply should be somewhere below +35 0 -35

**Synergy Audio Visual, in Melbourne were the distributors. You could
try them for information. Failing that, a message to uk.rec.audio
newsgroup may elicit some assistance.

Your friend should probably avoid buying stolen equipment in future.

--
Trevor Wilson www.rageaudio.com.au