After part for Sharp TV

S

Stephen

Guest
I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
Inside the tele there is a circuit board for the rear AV inputs,this board
of mine is broke so if you have one or know where I can get one,let me know.
Cheers
Stephen
 
Buy a really good soldering iron and some small/thin wire and fix it...

:>

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
Inside the tele there is a circuit board for the rear AV inputs,this board
of mine is broke so if you have one or know where I can get one,let me
know.
Cheers
Stephen
Click to expand...
 
No can do,circuit board is in 2 pieces.

"Allan" <allan@net.com> wrote in message
news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
Buy a really good soldering iron and some small/thin wire and fix it...

:

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
Inside the tele there is a circuit board for the rear AV inputs,this
board
of mine is broke so if you have one or know where I can get one,let me
know.
Cheers
Stephen
Click to expand...
 
On Sun, 5 Oct 2003 00:50:01 +1000, "Stephen" <sxxxx@dodo.com.au>
wrote:

No can do,circuit board is in 2 pieces.
Click to expand...
No problem - put the pieces together - glue them on the parts side
(use some strips of old PC board or other insulating material for
extra strength)
then jumper all the tracks that are broken along the crack with fine
wire and solder. you could make links across using bare fuse wire
even if you wanted.



"Allan" <allan@net.com> wrote in message
news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
Buy a really good soldering iron and some small/thin wire and fix it...

:

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
Inside the tele there is a circuit board for the rear AV inputs,this
board
of mine is broke so if you have one or know where I can get one,let me
know.
Cheers
Stephen
Click to expand...
 
I couldn't solder something to save my life.

"KLR" <kreed@bigpond.net.au> wrote in message
news:t6ptnvgiru8kv6gdsv1f1d6970ecpre8p8@4ax.com...
On Sun, 5 Oct 2003 00:50:01 +1000, "Stephen" <sxxxx@dodo.com.au
wrote:

No can do,circuit board is in 2 pieces.


No problem - put the pieces together - glue them on the parts side
(use some strips of old PC board or other insulating material for
extra strength)
then jumper all the tracks that are broken along the crack with fine
wire and solder. you could make links across using bare fuse wire
even if you wanted.



"Allan" <allan@net.com> wrote in message
news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
Buy a really good soldering iron and some small/thin wire and fix it...

:

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
Inside the tele there is a circuit board for the rear AV inputs,this
board
of mine is broke so if you have one or know where I can get one,let
me
know.
Cheers
Stephen
Click to expand...
 
well learn then

are there very fine track?

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmq3q$dtp03$1@ID-194817.news.uni-berlin.de...
: I couldn't solder something to save my life.
:
: "KLR" <kreed@bigpond.net.au> wrote in message
: news:t6ptnvgiru8kv6gdsv1f1d6970ecpre8p8@4ax.com...
: > On Sun, 5 Oct 2003 00:50:01 +1000, "Stephen" <sxxxx@dodo.com.au>
: > wrote:
: >
: > >No can do,circuit board is in 2 pieces.
: > >
: >
: > No problem - put the pieces together - glue them on the parts side
: > (use some strips of old PC board or other insulating material for
: > extra strength)
: > then jumper all the tracks that are broken along the crack with fine
: > wire and solder. you could make links across using bare fuse wire
: > even if you wanted.
: >
: >
: >
: > >"Allan" <allan@net.com> wrote in message
: > >news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
: > >> Buy a really good soldering iron and some small/thin wire and fix
it...
: > >>
: > >> :>
: > >>
: > >> "Stephen" <sxxxx@dodo.com.au> wrote in message
: > >> news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
: > >> > I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
: > >> > Inside the tele there is a circuit board for the rear AV
inputs,this
: > >board
: > >> > of mine is broke so if you have one or know where I can get one,let
: me
: > >> know.
: > >> > Cheers
: > >> > Stephen
: > >> >
: > >> >
: > >> >
: > >>
: > >>
: > >
: >
:
:
 
Some are and some aren't, and lots of them.

"Eric" <some1@clare.co.nz> wrote in message news:3f7eeee6@clear.net.nz...
well learn then

are there very fine track?

"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmq3q$dtp03$1@ID-194817.news.uni-berlin.de...
: I couldn't solder something to save my life.
:
: "KLR" <kreed@bigpond.net.au> wrote in message
: news:t6ptnvgiru8kv6gdsv1f1d6970ecpre8p8@4ax.com...
: > On Sun, 5 Oct 2003 00:50:01 +1000, "Stephen" <sxxxx@dodo.com.au
: > wrote:
:
: > >No can do,circuit board is in 2 pieces.
:
:
: > No problem - put the pieces together - glue them on the parts side
: > (use some strips of old PC board or other insulating material for
: > extra strength)
: > then jumper all the tracks that are broken along the crack with fine
: > wire and solder. you could make links across using bare fuse wire
: > even if you wanted.
:
:
:
: > >"Allan" <allan@net.com> wrote in message
: > >news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
: > >> Buy a really good soldering iron and some small/thin wire and fix
it...
:
: > >> :
:
: > >> "Stephen" <sxxxx@dodo.com.au> wrote in message
: > >> news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
: > >> > I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
: > >> > Inside the tele there is a circuit board for the rear AV
inputs,this
: > >board
: > >> > of mine is broke so if you have one or know where I can get
one,let
: me
: > >> know.
: > >> > Cheers
: > >> > Stephen
:
:
:
:
:
:
:
:
:
Click to expand...
 
OK I must admit for the cost of a new TV it's not worth it


"Stephen" <sxxxx@dodo.com.au> wrote in message
news:blmr80$dmgmg$1@ID-194817.news.uni-berlin.de...
: Some are and some aren't, and lots of them.
:
: "Eric" <some1@clare.co.nz> wrote in message news:3f7eeee6@clear.net.nz...
: > well learn then
: >
: > are there very fine track?
: >
: > "Stephen" <sxxxx@dodo.com.au> wrote in message
: > news:blmq3q$dtp03$1@ID-194817.news.uni-berlin.de...
: > : I couldn't solder something to save my life.
: > :
: > : "KLR" <kreed@bigpond.net.au> wrote in message
: > : news:t6ptnvgiru8kv6gdsv1f1d6970ecpre8p8@4ax.com...
: > : > On Sun, 5 Oct 2003 00:50:01 +1000, "Stephen" <sxxxx@dodo.com.au>
: > : > wrote:
: > : >
: > : > >No can do,circuit board is in 2 pieces.
: > : > >
: > : >
: > : > No problem - put the pieces together - glue them on the parts side
: > : > (use some strips of old PC board or other insulating material for
: > : > extra strength)
: > : > then jumper all the tracks that are broken along the crack with fine
: > : > wire and solder. you could make links across using bare fuse wire
: > : > even if you wanted.
: > : >
: > : >
: > : >
: > : > >"Allan" <allan@net.com> wrote in message
: > : > >news:3f7edb47$0$23594$5a62ac22@freenews.iinet.net.au...
: > : > >> Buy a really good soldering iron and some small/thin wire and fix
: > it...
: > : > >>
: > : > >> :>
: > : > >>
: > : > >> "Stephen" <sxxxx@dodo.com.au> wrote in message
: > : > >> news:blmg0k$dj4i2$1@ID-194817.news.uni-berlin.de...
: > : > >> > I'm after a part for my 51cm Sharp Model No-CX51E4 TV.
: > : > >> > Inside the tele there is a circuit board for the rear AV
: > inputs,this
: > : > >board
: > : > >> > of mine is broke so if you have one or know where I can get
: one,let
: > : me
: > : > >> know.
: > : > >> > Cheers
: > : > >> > Stephen
: > : > >> >
: > : > >> >
: > : > >> >
: > : > >>
: > : > >>
: > : > >
: > : >
: > :
: > :
: >
: >
:
:
 
Steven, you obviously should not be attempting to repair stuff you know
nothing about. Take it to a competent/qualified person.

What's black and crisp and clings to the ceiling?
Steven - electrocuted!.

:) Peter Lowrie

Stephen wrote:

I couldn't solder something to save my life.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top