A
A. B.
Guest
I am creating a netlist thru ADE. The input is a config with mixed
a schematic and analog extracted views. I worked fine up to now, but
yesterday I switched a block containing three other blocks to one
large analog_extracted view. When trying to netlist seems to finish
what appears to me a first pass as it issued the message : "End
netlisting Jan 15 17:10:39 2005" then come some warnings relating
to the "reader"
*WARNING* (reader): string at line 1 was not terminated on EOF, '"' added
*WARNING* (reader): extra ')' ignored at line 1 of string ")"
*WARNING* (reader): extra ')' ignored at line 1 of string ".../D\")
(root \"+1711/B\"))"
*WARNING* (reader): extra ')' ignored at line 1 of string "...D\") (root
\"+1711/B\")))"
*WARNING* (reader): string terminated by end-of-line at line 1 of string
"...D\") (root \"+1711/B\")))
this last line is a long one that I truncated
SYNTAX ERROR found at line 1 column 3443 of file *string*
*Error* lineread/read: syntax error encountered in input
If I switch back a sch views it will pass. So the problem
is related only to the extr view of the big block where
most likely there is long line that is going past a predefined
value or it is reading the whole file in a single step.
Anyone familiar with this problem?
P.S. I already opened a case with the sim vendor but they did
not answer me yet. Sourcelink did not return any clue.
a schematic and analog extracted views. I worked fine up to now, but
yesterday I switched a block containing three other blocks to one
large analog_extracted view. When trying to netlist seems to finish
what appears to me a first pass as it issued the message : "End
netlisting Jan 15 17:10:39 2005" then come some warnings relating
to the "reader"
*WARNING* (reader): string at line 1 was not terminated on EOF, '"' added
*WARNING* (reader): extra ')' ignored at line 1 of string ")"
*WARNING* (reader): extra ')' ignored at line 1 of string ".../D\")
(root \"+1711/B\"))"
*WARNING* (reader): extra ')' ignored at line 1 of string "...D\") (root
\"+1711/B\")))"
*WARNING* (reader): string terminated by end-of-line at line 1 of string
"...D\") (root \"+1711/B\")))
this last line is a long one that I truncated
SYNTAX ERROR found at line 1 column 3443 of file *string*
*Error* lineread/read: syntax error encountered in input
If I switch back a sch views it will pass. So the problem
is related only to the extr view of the big block where
most likely there is long line that is going past a predefined
value or it is reading the whole file in a single step.
Anyone familiar with this problem?
P.S. I already opened a case with the sim vendor but they did
not answer me yet. Sourcelink did not return any clue.