W
wilcn
Guest
Hi,
I am working with a PCB, which would be tested with a bed-of-nail
fixture, so every net need a test access; For some critical net for
the partion-ability of the circuit under test, I have attach a test
point to the net within the schemtics, and later was populated in the
layout; then I query the test point availability on the net, but to my
suprise, I got no test point on the net, meawhile, a "<TP_<n>.Pin1 is
not test point" message in the command window.
How can I make the Allegro be aware of the existance of the
testpoints?
thanks
I am working with a PCB, which would be tested with a bed-of-nail
fixture, so every net need a test access; For some critical net for
the partion-ability of the circuit under test, I have attach a test
point to the net within the schemtics, and later was populated in the
layout; then I query the test point availability on the net, but to my
suprise, I got no test point on the net, meawhile, a "<TP_<n>.Pin1 is
not test point" message in the command window.
How can I make the Allegro be aware of the existance of the
testpoints?
thanks