P
petitGarco
Guest
Dear All,
I am building up a radio transmission link with 4 bits digital input
signal(around 50-100Hz). I have got two RF modules which are 315Mhz radio
transmitter and recevicer in 8kbps data rate. Also HT12E(encoder) and HT12D
(decoder) have been used as well.
The circuit is working by inputting a 5V/0V (connect to 5V with switches)
and outputting with LEDs. However, when I connected the input to the signal
generator (input 10-100Hz square wave signal with 4.5V amplitude) and
dectected the ouput with CRO, it doesn't work. Nothing can be outputted by
the CRO. The connection is shown as the attachment. I am trying to send one
bit as testing.
Please kindly help me to solve the problem. Do I connect it in a wrong way
or is there any problem in the design? Thanks for your help.
Regards,
Lok
I am building up a radio transmission link with 4 bits digital input
signal(around 50-100Hz). I have got two RF modules which are 315Mhz radio
transmitter and recevicer in 8kbps data rate. Also HT12E(encoder) and HT12D
(decoder) have been used as well.
The circuit is working by inputting a 5V/0V (connect to 5V with switches)
and outputting with LEDs. However, when I connected the input to the signal
generator (input 10-100Hz square wave signal with 4.5V amplitude) and
dectected the ouput with CRO, it doesn't work. Nothing can be outputted by
the CRO. The connection is shown as the attachment. I am trying to send one
bit as testing.
Please kindly help me to solve the problem. Do I connect it in a wrong way
or is there any problem in the design? Thanks for your help.
Regards,
Lok