Ą
ĄÝ Lok ĄÝ
Guest
Dear All,
I am using a HT12E & HT12D with a RF transmitter and a RF receiver to do a
radio transmission link. Two serial clock pulse (30-100Hz) will be sent with
this link.
When I do the testing, the clock pulse can be sucessfully sent to the
receiver. However, the clock pulse has been slowed down after the decoding.
The output signal from the HT12D become very slow.
Also, the HT12D will only output 'high' (5V) if I change the input
frequency of the clock pulse below 80Hz or larger than 100Hz. That's mean,
it only works with frequency range 80-100Hz and the outuput frequency is
slowed down as well.
How can I solve this problem? Thanks for your help.
Best Regards,
Lok
I am using a HT12E & HT12D with a RF transmitter and a RF receiver to do a
radio transmission link. Two serial clock pulse (30-100Hz) will be sent with
this link.
When I do the testing, the clock pulse can be sucessfully sent to the
receiver. However, the clock pulse has been slowed down after the decoding.
The output signal from the HT12D become very slow.
Also, the HT12D will only output 'high' (5V) if I change the input
frequency of the clock pulse below 80Hz or larger than 100Hz. That's mean,
it only works with frequency range 80-100Hz and the outuput frequency is
slowed down as well.
How can I solve this problem? Thanks for your help.
Best Regards,
Lok