a question about flex10 configure

P

panwh

Guest
When I configure my flex10k, sometimes maxplus tell me that configure is not
successful, and the device does not work. Once the condition happens ,it
will be still for sometime, such as several hours or several days. But,
after that , it will be configured successfully and work well.
Can you tell me why and how to do ???
 
panwh wrote:
When I configure my flex10k, sometimes maxplus tell me that configure is not
successful, and the device does not work. Once the condition happens ,it
will be still for sometime, such as several hours or several days. But,
after that , it will be configured successfully and work well.
Can you tell me why and how to do ???
Click to expand...
It's some time since I've used a Flex10K but I've never noticed this.
Presumably you are configuring it with a ByteBlaster. Have you checked
all the connections, you might have a poor solder joint?

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top