A Buzzing Satellite Receiver

G

Gabi Klein

Guest
Hi!

I have an analog satellite receiver model SR-1100.

Lately, it started to have a humming/buzzing noise from the direction of its
power supply. The noise is there when the unit is on. When it is on Standby,
it is bearly heard.
Also, the picture is not stable, I guess because of the 'noise' from the
power supply.

In the power supply, I found one cap which looks like it is going to leak,
so I took it out. What else should I check, that could cause the buzzing
inside the power supply?


Thanks ahead,
Gabi
 
Howdy!

"Gabi Klein" <g_klein@netvision.net.il> wrote in message
news:bkihto$3j$1@news2.netvision.net.il...
Hi!

I have an analog satellite receiver model SR-1100.

Lately, it started to have a humming/buzzing noise from the direction of
its
power supply. The noise is there when the unit is on. When it is on
Standby,
it is bearly heard.
Also, the picture is not stable, I guess because of the 'noise' from the
power supply.

In the power supply, I found one cap which looks like it is going to leak,
so I took it out. What else should I check, that could cause the buzzing
inside the power supply?
Took it out, or replaced it with a new replacement?

This could be the whole problem by itself.

RwP
 
"Gabi Klein" <g_klein@netvision.net.il> wrote in message
news:bkihto$3j$1@news2.netvision.net.il...
Hi!

I have an analog satellite receiver model SR-1100.

Lately, it started to have a humming/buzzing noise from the direction of
its
power supply. The noise is there when the unit is on. When it is on
Standby,
it is bearly heard.
Also, the picture is not stable, I guess because of the 'noise' from the
power supply.

In the power supply, I found one cap which looks like it is going to leak,
so I took it out. What else should I check, that could cause the buzzing
inside the power supply?


Thanks ahead,
Gabi
Did you happen to run it off a generator/inverter recently?

db
 
On Sun, 21 Sep 2003 00:52:35 +0200, "Gabi Klein"
<g_klein@netvision.net.il> wrote:

I have an analog satellite receiver model SR-1100.

Lately, it started to have a humming/buzzing noise from the direction of its
power supply. The noise is there when the unit is on. When it is on Standby,
it is bearly heard.
Also, the picture is not stable, I guess because of the 'noise' from the
power supply.

In the power supply, I found one cap which looks like it is going to leak,
so I took it out. What else should I check, that could cause the buzzing
inside the power supply?

Er........you DID replace it with a good one, not just remove it? Of
course you did. Silly question :)

What voltages does the psu put out? I don't suppose it's anything
particularly special.
 

Welcome to EDABoard.com

Sponsor

Back
Top