9/10 Pin Motherboard Connector

[Searcher7]

Can anyone direct me to where I can pick up the 9/10 pin connectors
that are used on cables that connect motherboards to USB ports?

I need to find the housings as well as the pins, along with the
recommended crimper.

The guys at the closest computer store had no idea what I was
referring to even though I shown them a picture. And unless you know
the name or part number of what you are looking for the Digi-Key and
Mouser search is close to useless.

Thanks.

Darren Harris
Staten Island, New York.

 

[Rich Webb]

On Sat, 19 Feb 2011 13:20:25 -0800 (PST), Searcher7
<Searcher7@mail.con2.com> wrote:

Can anyone direct me to where I can pick up the 9/10 pin connectors
that are used on cables that connect motherboards to USB ports?

Do you mean the stackable 0.1" housings?

<http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM2808-ND>

I need to find the housings as well as the pins, along with the
recommended crimper.

If so, the pins are 16-02-0096 or 97. The manufacturer's crimper is $$$;
this <http://www.toolking.com/crimper-ratcheted-open-barrel-30-18-awg>
works with these pins (and others of similar configuration).

--
Rich Webb Norfolk, VA

 

[Searcher7]

On Feb 19, 5:22 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:

On Sat, 19 Feb 2011 13:20:25 -0800 (PST), Searcher7

Search...@mail.con2.com> wrote:
Can anyone direct me to where I can pick up the 9/10 pin connectors
that are used on cables that connect motherboards to USB ports?

Do you mean the stackable 0.1" housings?

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM28....

I need to find the housings as well as the pins, along with the
recommended crimper.

If so, the pins are 16-02-0096 or 97. The manufacturer's crimper is $$$;
this <http://www.toolking.com/crimper-ratcheted-open-barrel-30-18-awg
works with these pins (and others of similar configuration).

--
Rich Webb     Norfolk, VA

Yes. 0.1".

Here is a pic of what I'm looking for:
http://i290.photobucket.com/albums/ll257/Statenislander/MAME/ApeviaXPleasure_FireWireUSB.jpg

Thanks.

Darren Harris
Staten Island, New York.

 

[Rich Webb]

On Sat, 19 Feb 2011 15:17:16 -0800 (PST), Searcher7
<Searcher7@mail.con2.com> wrote:

On Feb 19, 5:22 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:
On Sat, 19 Feb 2011 13:20:25 -0800 (PST), Searcher7

Search...@mail.con2.com> wrote:
Can anyone direct me to where I can pick up the 9/10 pin connectors
that are used on cables that connect motherboards to USB ports?

Do you mean the stackable 0.1" housings?

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM28...

I need to find the housings as well as the pins, along with the
recommended crimper.

If so, the pins are 16-02-0096 or 97. The manufacturer's crimper is $$$;
this <http://www.toolking.com/crimper-ratcheted-open-barrel-30-18-awg
works with these pins (and others of similar configuration).

--
Rich Webb     Norfolk, VA

Yes. 0.1".

Here is a pic of what I'm looking for:
http://i290.photobucket.com/albums/ll257/Statenislander/MAME/ApeviaXPleasure_FireWireUSB.jpg

Yep. The ones that I linked to above are not identical but they'll work
just fine. You would need to stack two back-to-back, as they're single
row connectors.

I "stock" a few of the single row on hand since they can be used either
alone or adjacent, for pseudo-dual row. However, if you'd prefer the
dual row member of the family, look at the 70450-series, like
<http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM2522-ND>
which uses receptacle pins 16-02-0103
<http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM2512-ND>

--
Rich Webb Norfolk, VA

 

[Rich Grise]

Searcher7 wrote:

On Feb 19, 5:22 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:

If so, the pins are 16-02-0096 or 97. The manufacturer's crimper is $$$;
this <http://www.toolking.com/crimper-ratcheted-open-barrel-30-18-awg
works with these pins (and others of similar configuration).

--
Rich Webb     Norfolk, VA

Yes. 0.1".

Here is a pic of what I'm looking for:

http://i290.photobucket.com/albums/ll257/Statenislander/MAME/ApeviaXPleasure_FireWireUSB.jpg

AMP "modu"

Hope This Helps!
Rich

 

[Searcher7]

On Feb 19, 7:23 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:

On Sat, 19 Feb 2011 15:17:16 -0800 (PST), Searcher7



Search...@mail.con2.com> wrote:
On Feb 19, 5:22 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:
On Sat, 19 Feb 2011 13:20:25 -0800 (PST), Searcher7

Search...@mail.con2.com> wrote:
Can anyone direct me to where I can pick up the 9/10 pin connectors
that are used on cables that connect motherboards to USB ports?

Do you mean the stackable 0.1" housings?

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM28...

I need to find the housings as well as the pins, along with the
recommended crimper.

If so, the pins are 16-02-0096 or 97. The manufacturer's crimper is $$$;
this <http://www.toolking.com/crimper-ratcheted-open-barrel-30-18-awg
works with these pins (and others of similar configuration).

--
Rich Webb Norfolk, VA

Yes. 0.1".

Here is a pic of what I'm looking for:
http://i290.photobucket.com/albums/ll257/Statenislander/MAME/ApeviaXP...

Yep. The ones that I linked to above are not identical but they'll work
just fine. You would need to stack two back-to-back, as they're single
row connectors.

I "stock" a few of the single row on hand since they can be used either
alone or adjacent, for pseudo-dual row. However, if you'd prefer the
dual row member of the family, look at the 70450-series, like
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM25....
which uses receptacle pins 16-02-0103
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM25....

--
Rich Webb     Norfolk, VA

Thanks a lot.

Darren Harris
Staten Island, New York.