741 OP_AMP Thermocouple

R

Robert

Guest
Keeping the circuit simple as possible for maxium output voltage, if a
thermocouple is conected to inputs pin 2 and pin3 is a resisor required
between input of pin 2 to output of pin 6 for maxium output voltage or the
resistor is not even required.

In replace of the resistor can a conection be made between input of pin 2 to
output of pin 6.

Any sensor that generates its own voltage in mili volts can that be fed to
the inputs of pins 2 and 3 or is a negative feed back required for maxium
voltage output of pin 6




Thanks Robert
 
assignment help is expensive, but you get wat u pay 4, hey!

:
: Keeping the circuit simple as possible for maxium output voltage, if a
: thermocouple is conected to inputs pin 2 and pin3 is a resisor
required
: between input of pin 2 to output of pin 6

yes

for maxium output voltage or the resistor is not even required.

yes

: In replace of the resistor can a conection be made between input of
pin 2 to
: output of pin 6.

yes

: Any sensor that generates its own voltage in mili volts can that be
fed to
: the inputs of pins 2 and 3

yes but

: or is a negative feed back required for maxium
: voltage output of pin 6

yes, otherwise the o/p will saturate due to the opon loop gane bein very
hi
\
:
:
:
:
: Thanks Robert

thanku
ps hows the engrish classes going

:
:
 
Thanks for the hepl you piece of shit, sounds like you are a goverment
worker looking at your email address, spend to much time looking for
spelling errors then helping people KUN******

"Ed-" <deeppocket@pm.gov.au> wrote in message
news:e2vk92$5a0$1@news-01.bur.connect.com.au...
assignment help is expensive, but you get wat u pay 4, hey!

:
: Keeping the circuit simple as possible for maxium output voltage, if a
: thermocouple is conected to inputs pin 2 and pin3 is a resisor
required
: between input of pin 2 to output of pin 6

yes

for maxium output voltage or the resistor is not even required.

yes

: In replace of the resistor can a conection be made between input of
pin 2 to
: output of pin 6.

yes

: Any sensor that generates its own voltage in mili volts can that be
fed to
: the inputs of pins 2 and 3

yes but

: or is a negative feed back required for maxium
: voltage output of pin 6

yes, otherwise the o/p will saturate due to the opon loop gane bein very
hi
\
:
:
:
:
: Thanks Robert

thanku
ps hows the engrish classes going

:
:
Click to expand...
 
Why don`t you help people then giving them shit you arshole you KUN*******







"Rob" <rdsfal@yahoo.com.au> wrote in message
news:445375b2$0$30744$5a62ac22@per-qv1-newsreader-01.iinet.net.au...
thanku
ps hows the engrish classes going

:
:


correction - crasses
Click to expand...
 
Take a chill pill or two.

damm, now you know my workplace...

btw, ow goods ur spam filtr you little tosser?



"Robert" <mars2006@iinet.net.au> wrote in message
news:44573dd2$0$16939$5a62ac22@per-qv1-newsreader-01.iinet.net.au...
: Thanks for the hepl you piece of shit, sounds like you are a goverment
: worker looking at your email address, spend to much time looking for
: spelling errors then helping people KUN******
:
: "Ed-" <deeppocket@pm.gov.au> wrote in message
: news:e2vk92$5a0$1@news-01.bur.connect.com.au...
: > assignment help is expensive, but you get wat u pay 4, hey!
: >
: > :
: > : Keeping the circuit simple as possible for maxium output voltage,
if a
: > : thermocouple is conected to inputs pin 2 and pin3 is a resisor
: > required
: > : between input of pin 2 to output of pin 6
: >
: > yes
: >
: > for maxium output voltage or the resistor is not even required.
: >
: > yes
: >
: > : In replace of the resistor can a conection be made between input
of
: > pin 2 to
: > : output of pin 6.
: >
: > yes
: >
: > : Any sensor that generates its own voltage in mili volts can that
be
: > fed to
: > : the inputs of pins 2 and 3
: >
: > yes but
: >
: > : or is a negative feed back required for maxium
: > : voltage output of pin 6
: >
: > yes, otherwise the o/p will saturate due to the opon loop gane bein
very
: > hi
: > \
: > :
: > :
: > :
: > :
: > : Thanks Robert
: >
: > thanku
: > ps hows the engrish classes going
: >
: > :
: > :
: >
:
:
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top