5051 -> i2C

[Stijn Goris]

hi all,

I want to use a 5051 processor to control a I2C bus. The 5051 is located on
another PCB the the I2C bus so I need to connect the 5051 via wires to the
I2C bus. Does someone has an idea what kind of connector I best use?

kind regards
Stijn

 

[Stijn Goris]

that procesor is a 8051 type

"Stijn Goris" <mepisto@hotmail.com> wrote in message
news:nUhac.55539$UP2.3404897@phobos.telenet-ops.be...

hi all,

I want to use a 5051 processor to control a I2C bus. The 5051 is located
on
another PCB the the I2C bus so I need to connect the 5051 via wires to the
I2C bus. Does someone has an idea what kind of connector I best use?

kind regards
Stijn

 

[petrus bitbyter]

"Stijn Goris" <mepisto@hotmail.com> schreef in bericht
news:nUhac.55539$UP2.3404897@phobos.telenet-ops.be...

hi all,

I want to use a 5051 processor to control a I2C bus. The 5051 is located
on
another PCB the the I2C bus so I need to connect the 5051 via wires to the
I2C bus. Does someone has an idea what kind of connector I best use?

kind regards
Stijn

Stijn,

Ever used a 4p4c mini-modular jack and plug. For short distance (20cm) the
flat telephonecable did quite well. If you need longer distance you'll have
to use ordinary round cable as the thin copper of the flat one becomes to
high a resistance.

petrus


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.639 / Virus Database: 408 - Release Date: 22-3-2004