20,000 Watt, 5000 Lb Stereo Amplifier (Only $50,000).

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each

 

On Thursday, March 30, 2017 at 4:13:56 AM UTC-4, Gareth Magennis wrote:

wrote in message news:ud7pdc1irot26c3fsr1snjrdoispide4or@4ax.com...

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each



*********************************************************




Pah, you can get 40kW of amp in a 1U box with close to zero distortion for
around $1500.
Now THAT is an amplifier.

https://www.bluearan.co.uk/index.php?id=PKN3PHASE40K



Gareth.

I think you're off by a decimal place unless the exchange rate has changed!

 

[Gareth Magennis]

wrote in message news:ud7pdc1irot26c3fsr1snjrdoispide4or@4ax.com...

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each



*********************************************************




Pah, you can get 40kW of amp in a 1U box with close to zero distortion for
around $1500.
Now THAT is an amplifier.

https://www.bluearan.co.uk/index.php?id=PKN3PHASE40K



Gareth.

 

On Thursday, March 30, 2017 at 1:13:56 AM UTC-7, Gareth Magennis wrote:

wrote in message news:ud7pdc1irot26c3fsr1snjrdoispide4or@4ax.com...

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each



*********************************************************




Pah, you can get 40kW of amp in a 1U box with close to zero distortion for
around $1500.
Now THAT is an amplifier.

https://www.bluearan.co.uk/index.php?id=PKN3PHASE40K



Gareth.

Does it come with a bridge? Usually stories like this involve the sale of a bridge.

 

[tom]

<stratus46@yahoo.com> wrote in message
news:8d119b10-de9e-4659-bc19-9fe19945e8a9@googlegroups.com...
On Thursday, March 30, 2017 at 1:13:56 AM UTC-7, Gareth Magennis wrote:

wrote in message news:ud7pdc1irot26c3fsr1snjrdoispide4or@4ax.com...

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ a1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each



*********************************************************




Pah, you can get 40kW of amp in a 1U box with close to zero distortion for
around $1500.
Now THAT is an amplifier.

https://www.bluearan.co.uk/index.php?id=PKN3PHASE40K



Gareth.

Does it come with a bridge? Usually stories like this involve the sale of a
bridge.

++++++++++++++++++++++++++++++++++++++++++++

Those are vacuum cleaner watts.

 

[Gareth Magennis]

wrote in message
news:493dba44-f20d-46a8-999c-b7ff4a4eeca5@googlegroups.com...

On Thursday, March 30, 2017 at 4:13:56 AM UTC-4, Gareth Magennis wrote:

wrote in message news:ud7pdc1irot26c3fsr1snjrdoispide4or@4ax.com...

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each



*********************************************************




Pah, you can get 40kW of amp in a 1U box with close to zero distortion for
around $1500.
Now THAT is an amplifier.

https://www.bluearan.co.uk/index.php?id=PKN3PHASE40K



Gareth.

I think you're off by a decimal place unless the exchange rate has changed!


***********************************************************




Oops, so I am. Typo in translation
15 thousand of your US dollars will get you 20kW per side bridged, if you
have an appropriate 3-phase supply.



Gareth.

 

[bitrex]

On 03/30/2017 02:01 AM, oldschool@tubes.com wrote:

FROM:
https://www.surplussales.com/Microphones-Audio/MicroAudio-7.html

Now, ***THIS*** is what I call a SOUND SYSTEM !!!

(For STEREO, you'll need 2 of these)

Total audio output power (for two amps), 20KW.
Tube filaments operate 6 volts @ 60 amps (each tube)
Weight 5000 lbs
230 or 460 vac, 3 phase MAINS power required to operate.
Speakers *NOT* included.

No schematic on website (Damnit).

ONLY $50,000 plus S+H.

The WL-5736 output tubes can be seen here:
http://lampes-et-tubes.info/tt/tt004.php?l=e

Or buy one tube on ebay for $1665.00 plus $50 Shipping.

http://www.ebay.com/itm/Westinghouse-WL-5736-tube-/322227283515#ht_220wt_938
---

[Web Quote]

(EQP) WEST-FG-10
Westinghouse type FG-10 Audio Amplifier - 10 kw. Accepts 600 ohm input
signal, 10 mW maximum and produces 10 kw output at impedances from 1.6
ohms up. Frequency response 30 - 10,000 Hz @ ą1.5%. Total harmonic
distortion less than 5%. Reduced output available below 30 Hz and up to
20,000 Hz. Multiple tapped output transformer allows a wide range of
output impedances.

Uses a McIntosh K-1071, 200 watt amplifier as a driver, feeding four (4)
WL-5736 triodes with plate dissipation of 2500 watts per tube and
maximum DC input power of 4200 watts.

Useful for driving vibration testing equipment or other industrial
applications. Single channel, not stereo.

Another feature of this unit is that it only requires 23 square feet of
floor space in a 82-1/2" tall cabinet. Condition of unit is excellent.
Probably never used, but 60 years of dust. Manufactured in 1953. Weighs
2,500 lbs. Manual is included. Sold as-is. No warranty expressed or
implied.

* Input power: 230 or 460 vac, 3 phase @ 50 Hz or 60 Hz
* Dimensions: 34" x 44" x 82-1/2"H

$25,000 each

I think I remember seeing that same ad on the same store site probably
going on ten years ago now. How many of them do they have? Are they
still trying to sell the same one?

 

"How many of them do they have? Are they
still trying to sell the same one? "

They must have a warehouse full of them. You know how strong the demand is. Everyone wants to put three phass power in their house right ? Around here you pay for that, not the power company. It is not cheap and is actually not available in most residential areas here.

And no mention of speakers. I am selling my Phase Linear because it blew so many speakers. What (watt) are we talking here ? A thousand speakers that can handle what, a couple thousand apiece ? That'll make you neighbors happy, and I mean even if you are on a farm.

Things like this are made for like Woodstock. Not even to be used in the city. Nice to imagine having one, but thing about the speakers.

And the cops. I have been in jail for a loud stereo. One day and actually it was not bad. But still, I would have had a better time at hoe because there was beer there.

 

[pfjw@aol.com]

On Wednesday, April 12, 2017 at 11:10:10 PM UTC-4, jurb...@gmail.com wrote:

> And no mention of speakers. I am selling my Phase Linear because it blew so many speakers. What (watt) are we talking here ? A thousand speakers that can handle what, a couple thousand apiece ?

I am presently running an amp capable of 500 watts into its speakers (Citation 16 into Maggies). I can (and do) play at any volume I would care to - that is I could tolerate without ear damage - and without clipping. I have no worries about speaker damage. The Citation 16, while not quite in the Phase Linear 700B class, certainly is in the 400 class.

I use regularly two brute-force amps, both HK products (Citation 16 & 19). Again I can (and do) run *LOUD* and have never, repeat, never damaged a speaker thereby. This is not to mention the several other amp & speaker combinations in the inventory.

I suspect user-error.

Peter Wieck
Melrose Park, PA

 

[Cursitor Doom]

On Thu, 13 Apr 2017 04:31:05 -0700, pfjw@aol.com wrote:

I use regularly two brute-force amps, both HK products (Citation 16 &
19). Again I can (and do) run *LOUD* and have never, repeat, never
damaged a speaker thereby. This is not to mention the several other amp
& speaker combinations in the inventory.

God that must sound terrible. I would never even contemplate buying amps
made in Hong Kong (or mainland China for that matter). And I'd certainly
never admit it in a newsgroup!
I still think the best combo by far is Scandanavian amps like B&O coupled
with English speakers such as Celestion, Tannoy, KEF & so forth. YMMV.

 

[Mike Paff]

On Thu, 13 Apr 2017 22:16:58 -0000 (UTC), Cursitor Doom
<curd@notformail.com> wrote:

On Thu, 13 Apr 2017 04:31:05 -0700, pfjw@aol.com wrote:

I use regularly two brute-force amps, both HK products (Citation 16 &
19). Again I can (and do) run *LOUD* and have never, repeat, never
damaged a speaker thereby. This is not to mention the several other amp
& speaker combinations in the inventory.

God that must sound terrible. I would never even contemplate buying amps
made in Hong Kong (or mainland China for that matter). And I'd certainly
never admit it in a newsgroup!
I still think the best combo by far is Scandanavian amps like B&O coupled
with English speakers such as Celestion, Tannoy, KEF & so forth. YMMV.

HK in this case refers to Harmon Kardon, not Hong Kong.

 

[pfjw@aol.com]

On Thursday, April 13, 2017 at 6:35:02 PM UTC-4, Mike Paff wrote:

HK in this case refers to Harmon Kardon, not Hong Kong.

And made in Plainfield, Long Island, New York.

The only pacific rim audio equipment I use are CD changers from Sony, Japan. The rest is US or Euro in origin.

Peter Wieck
Melrose Park, PA

 

[bitrex]

On 04/14/2017 06:57 AM, pfjw@aol.com wrote:

On Thursday, April 13, 2017 at 6:35:02 PM UTC-4, Mike Paff wrote:


HK in this case refers to Harmon Kardon, not Hong Kong.

And made in Plainfield, Long Island, New York.

The only pacific rim audio equipment I use are CD changers from Sony, Japan. The rest is US or Euro in origin.

Peter Wieck
Melrose Park, PA

I used to have an Onkyo TX-2500 mk2 receiver from around 1978; I thought
it was pretty nice! for being a "low-end" Japanese receiver from that
era. Got lost in a move I think, wish I knew what happened to it...

<https://s-media-cache-ak0.pinimg.com/originals/d8/cd/9e/d8cd9e5b5eac265995e40cfd6bff35d0.jpg>

 

NOT OVER 24k ?

https://www.google.com/#q=AMPLIFIERS+POWERING+NAVAL+SHIPS+HAILERS&spf=68

I TRIED ONE AT Farragut. 9 0R 12 HORN CONES. LOUD. ACROOSS THE RIVER N THRU THE WOODS NO PROBLEM ...EXPECT THE RIG WAS PRE ADJUSTED TO NOT BREAK GLASS...PROB KOREAN SURPLUS.


PLEASED FINDING EVERYONE WAS AMUSED.

 

[bitrex]

On 04/14/2017 01:44 PM, avagadro7@gmail.com wrote:

NOT OVER 24k ?

https://www.google.com/#q=AMPLIFIERS+POWERING+NAVAL+SHIPS+HAILERS&spf=68

I TRIED ONE AT Farragut. 9 0R 12 HORN CONES. LOUD. ACROOSS THE RIVER N THRU THE WOODS NO PROBLEM ...EXPECT THE RIG WAS PRE ADJUSTED TO NOT BREAK GLASS...PROB KOREAN SURPLUS.


PLEASED FINDING EVERYONE WAS AMUSED.

what the fuck.