12v cd to tape converter -fuse type

T

tom

Guest
Hello. I need to replace the fuse in a 12v cd to tape converter. I
removed the old one, but I seemed to have lost it so now I don't know
what kind of fuse I'm looking for. Any help gratly appreciated. Thanks
 
There should be a label at the actual fuse block, it will indicate the
ratings in amps of the required fuse.
The back panel or bottom of the device should also show the wattage rating,
or maybe even amperage draw.
??What caused the fuse to blow? There had to be an overload to cause the
failure.
"tom" <tominto@gmail.com> wrote in message
news:1150494337.725831.215110@p79g2000cwp.googlegroups.com...
Hello. I need to replace the fuse in a 12v cd to tape converter. I
removed the old one, but I seemed to have lost it so now I don't know
what kind of fuse I'm looking for. Any help gratly appreciated. Thanks
Click to expand...
 
I don't see a rating for amps. I replaced the fuse with a low amp fuse
but no luck, so it must be something else. I'll just buy a new one

Art wrote:
There should be a label at the actual fuse block, it will indicate the
ratings in amps of the required fuse.
The back panel or bottom of the device should also show the wattage rating,
or maybe even amperage draw.
??What caused the fuse to blow? There had to be an overload to cause the
failure.
"tom" <tominto@gmail.com> wrote in message
news:1150494337.725831.215110@p79g2000cwp.googlegroups.com...
Hello. I need to replace the fuse in a 12v cd to tape converter. I
removed the old one, but I seemed to have lost it so now I don't know
what kind of fuse I'm looking for. Any help gratly appreciated. Thanks
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top