12 volt battery connections

B

Brett Cummins

Guest
Hey!
I'm 14 and I'm trying to power a small neon light that requires a
12 volts of electricity (usually for a car)with a 12 volt battery . I
have an old rechargable battery from a toy car that I had when I was
little. I removed the battery, and I realized that there is a four pin
connecter with four wires leading from it. There are only two wires
going to the neon tube, so how do I do this? Do I only need to use two
of the wires, or do I need to connect the two positive wires together
and the two negative wires to form the two necessary connections?
Thank you!
 
Hi,
Get your hands on a Voltmeter, or ask your dad for one. Then find out if
your battery gives out still 12 V or more. You do this by connecting one of
de negative leads with the com of the meter and the positive with the
positive from the meter do this for all 4 combinations (naturaly) ... By
this time you will have found out if you need to use all four leads from the
battry or not..... and if the battery is any good .

ps sorry for any typo's I normaly speak Dutch
"Brett Cummins" <packerfan6000@yahoo.com> schreef in bericht
news:814a5e5a.0408221539.4a8a20be@posting.google.com...
Hey!
I'm 14 and I'm trying to power a small neon light that requires a
12 volts of electricity (usually for a car)with a 12 volt battery . I
have an old rechargable battery from a toy car that I had when I was
little. I removed the battery, and I realized that there is a four pin
connecter with four wires leading from it. There are only two wires
going to the neon tube, so how do I do this? Do I only need to use two
of the wires, or do I need to connect the two positive wires together
and the two negative wires to form the two necessary connections?
Thank you!
Click to expand...
 
Hi,
Get your hands on a Voltmeter, or ask your dad for one. Then find out if
your battery gives out still 12 V or more. You do this by connecting one of
de negative leads with the com of the meter and the positive with the
positive from the meter do this for all 4 combinations (naturaly) ... By
this time you will have found out if you need to use all four leads from the
battry or not..... and if the battery is any good .
Click to expand...

Hey!
Thank's for the response! I actually have a voltmeter, because
I'm into model railroading. I wired it like you said and set the
meter's dial to 20 DC volts. I get a reading of about 2.80. For a 12
volt battery, I'm assuming that it should read 12. Is the battery
almost dead, or am I reading this wrong? Thanks again!
 
Brett Cummins wrote:

Hi,
Get your hands on a Voltmeter, or ask your dad for one. Then find out
if
your battery gives out still 12 V or more. You do this by connecting one
of de negative leads with the com of the meter and the positive with the
positive from the meter do this for all 4 combinations (naturaly) ... By
this time you will have found out if you need to use all four leads from
the battry or not..... and if the battery is any good .


Hey!
Thank's for the response! I actually have a voltmeter, because
I'm into model railroading. I wired it like you said and set the
meter's dial to 20 DC volts. I get a reading of about 2.80. For a 12
volt battery, I'm assuming that it should read 12. Is the battery
almost dead, or am I reading this wrong? Thanks again!
Click to expand...
You could have potentially up to 6 readings. Label the leads, say,
A, B, C, and D. You can put the meter across AB, AC, AD, BC, BD, or CD,
and will have to observe polarity while doing it.

ixTell us those se readings, and it will tell us a lot more about
the battery.

Cheers!
Rich
 
On 22 Aug 2004 16:39:23 -0700, packerfan6000@yahoo.com (Brett Cummins)
wrote:

Hey!
I'm 14 and I'm trying to power a small neon light that requires a
12 volts of electricity (usually for a car)with a 12 volt battery . I
have an old rechargable battery from a toy car that I had when I was
little. I removed the battery, and I realized that there is a four pin
connecter with four wires leading from it. There are only two wires
going to the neon tube, so how do I do this? Do I only need to use two
of the wires, or do I need to connect the two positive wires together
and the two negative wires to form the two necessary connections?
Thank you!
Click to expand...
I expect that a rechargeable battery 8 - 10 years old will be useless
after all these years. It will certainly be almost fully discharged
by now, and probably won't hold a charge if you try to recharge it.




--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top